.

Thermal Radiation Flooring Combustion Tester

Product Standards

ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings using a radiant heat source.

ISO 9239 - 2: Reaction to fire tests for floor coverings - Part 2: Determination of flame spread under a heat flux of 25 kW/m².

ASTM E 648: Standard test method for critical radiant flux of floor covering systems using a radiant heat energy source.

ASTM E 970: Standard test method for critical radiant flux of attic floor insulation using a radiant heat energy source.

NFPA 253: Standard test method for critical radiant flux of side wall covering systems using a radiant heat energy source (National Fire Protection Association Code, Vol. 6).

GB/T 11785 - 2005; GB 8624: 2012

Product Specifications

Equipment Model: PX07006

Equipment Dimensions: 2220 (W) × 1500 (D) × 2650 (H) mm

Dimensions of Control Box 1: 650 (W) × 675 (D) × 1750 (H) mm

Dimensions of Control Box 2: 650 (W) × 675 (D) × 1200 (H) mm

Power Supply: AC 220V, 25A

Weight: Approximately 220 kg

Compressed Air Source: Propane with a purity of over 95%


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Universal finger friction tester
Universal finger friction tester Brief IntroductionThe main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of stan...
Spinal Pedicle Screw-Rod System Compressive Fatigue Tester
Spinal Pedicle Screw-Rod System Compressive Fatigue Tester Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq...
Small Parts meter
Small Parts meter Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-1 16 CFR Part 1501 ISO 8124-1 Product Advantages: Eff...
Cylindrical Battery In-Situ Volume Swelling Testing System
Cylindrical Battery In-Situ Volume Swelling Testing System Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliability and Abuse Testing ASTM E83...
Automotive Wires Flammability Tester
Automotive Wires Flammability Tester Compliance Standards FMVSS 302 (Federal Motor Vehicle Safety Standard) ISO 6722 (Road Vehicle Cable Flammability) UL 94 (Tests for Flammabilit...
供应产品

Same products

Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
Xenon Test Chamber
Xenon Test Chamber 卖方: Standard International Group (HK) Limited Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
Single Cable Vertical Flame Tester
Single Cable Vertical Flame Tester 卖方: 上海千实精密仪器 Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
Safety Helmet Flammability Tester
Safety Helmet Flammability Tester 卖方: 上海千实精密仪器 Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
Furniture flammability tester
Furniture flammability tester 卖方: 上海千实精密仪器 Product details Furniture flammability tester is mainly used to test the combustion performance ...