Pressure Transmission Flow Meter meter
The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performance in fluid systems. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:
Standards
The design and manufacture of the Pressure Transmission and Flow Tester need to comply with relevant industry standards and technical specifications to ensure the accuracy and reliability of test results. Common compliance standards include, but are not limited to: GB/T 19335 - 2022 General Technical Requirements for Disposable Blood - path Products, etc.
Main Uses
- Fluid System Performance Evaluation: The Pressure Transmission and Flow Tester can be used to evaluate the pressure transmission efficiency and flow characteristics of fluid systems under specific conditions, ensuring that the systems can meet the design and usage requirements.
- Product Quality Control: During the manufacturing process, this tester can be used for quality inspection of fluid system components (such as pipelines, valves, sensors, etc.) to ensure that product quality complies with relevant standards and regulations.
- Fault Diagnosis and Maintenance: By testing the pressure and flow data of fluid systems, it can help diagnose faults in the systems and provide a basis for the repair and replacement of faulty components.
- Research, Development and Optimization: In the design, research and development process of fluid systems, the tester can be used to test the effects of different design or improvement schemes, providing data support for optimizing system performance.
Technical Parameters
- Testing Range: - Pressure testing range: 0 - 10 KPa (standard configuration), which can be customized according to actual needs.
- Flow testing range: It depends on the specific model and configuration, usually covering a wide flow range.
- Accuracy: - Pressure testing accuracy: 0.5%FS (full - scale error) to ensure the accuracy of test results.
- Flow testing accuracy: It depends on the specific model and configuration, but also needs to meet high - accuracy requirements.
- Air Source Pressure and Interface: - Air source pressure: ≤0.7 MPa (the user provides the air source) to ensure the normal operation of the tester.
- Air source interface: Φ8 mm polyurethane tube or other standard interfaces, facilitating connection to air source equipment.
- Power Supply: - The voltage and frequency of the power supply vary according to the specific model. It usually supports a wide voltage range to adapt to the electrical standards of different regions. - External Dimensions and Weight:
- External dimensions: The main unit size is 300 mm(L)×410 mm(W)×150 mm(H) (the specific dimensions vary depending on the model), making it easy to place and operate.
- Weight: Moderate, easy to carry and move. - Other Functions: - Data recording and storage: It has the function of real - time data recording and storage, which is convenient for subsequent analysis and processing.
- Display and operation interface: It adopts a color touch - screen operation interface, supporting Chinese - English switching (or other languages). The interface is clear and easy to operate and use.
- Automatic calibration and fault diagnosis: Some models are equipped with an automatic calibration function to ensure the accuracy of test results. At the same time, they have a fault diagnosis function, which is convenient for timely detection and resolution of problems.
在线联系供应商
Other supplier products
 |
Melting Materials Dripping Test Machine | Description This tester meet international standards NF P92-505. EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of t... |
 |
Thoracic Drainage System Performance Tester | The thoracic drainage tester is widely applied in the medical field, mainly used for monitoring and evaluating the performance of thoracic drainage... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
 |
Protective Clothing Thermal Insulation/Conductivity Measuring Apparatus | Applicable Standards: ISO 11092:2014 ASTM D1518-17 ASTM F1868 ISO 5085-1 ISO 9920 The protective clothing thermal conductivity tester is a profe... |
 |
Dry and Wet Retroreflection Measuring Instrument (for Dry and Wet Retroreflectometer) | Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
