Syringe piston thrust test device
Product introduction
The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure the thrust of the syringe piston in the process of pushing. The device adopts sensor technology and data processing technology, which can measure piston thrust accurately and quickly, and provide reliable guarantee for quality control in the production process of syringe.
Test principle
The syringe piston thrust tester is mainly composed of sensors, measurement and control systems and displays. Its principle is based on force measurement. By measuring the force generated by the syringe piston when it pushes out the liquid, it can determine whether its thrust meets the standard requirements.
Meet the standard
GB15811. ISO7886. YBB. YBB. YBB. GB 15810-2019. YY/T0573.2-2018
Main parameter
1. Range: 0-500N (300N 1000N 2000N optional)
2. Speed: 1-500mm/min can be set arbitrarily
3. Error: ±0.1mm/S
4. Power supply: AC 220V±22V, 50Hz
Operation process
1. Fix the syringe on the tester to ensure its stable position;
2. Adjust the measuring range of the tester to match the specifications of the syringe under test;
3. Press the start button, the tester starts to measure the piston thrust;
4. Record the measurement results and judge whether they meet the standard requirements;
5. If it does not meet the standard requirements, it is necessary to adjust the syringeor replace the parts;
6. After completing the test, turn off the tester, and record and file the results.
在线联系供应商
Other supplier products
 |
Enamel Boiling Water Resistance Tester | The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical attack resistance of enamel coatings under boiling water conditions... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Techni... |
 |
Monomer combustion test device for building materials | Meet the standard Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer Co... |
 |
Medical glove water-impermeability tester | The medical glove water-impermeability tester is used to determine the water-impermeability performance of medical rubber examination gloves, inclu... |
 |
Large-Area 3D Optical Surface Profilometer | Large-Area 3D Optical Surface Profilometer is a high-performance three-dimensional optical metrology system designed for large-area surface topogra... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
