Resistance Tester for Molten Metal Droplet (Splash) Impact Performance
Performance and Standards:
This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing standards such as ISO 9150. EN 348. GB/T 17599. AQ6103. GB 8965.2. etc. It is applicable to the protective performance of various fabrics and composite fabrics against burns caused by molten metal splashes on the human body. Its testing principle is to determine the number of molten droplets required for the temperature rise of 40K behind the sensor when metal droplets impact the specimen at a certain angle.
Technical Parameters
Oxygen and acetylene flow regulation devices, which can provide standard gas flow for welding nozzles.
Oxygen and acetylene pressure regulation devices, which can precisely control the inlet pressure to 250Kpa and 50Kpa.
Oxyacetylene welding torch for melting metal strips, with a welding nozzle diameter of (1.2 ± 0.1) mm.
A stepper motor is used to drive the metal strip, and the running speed of the metal strip can be set.
Droplet guiding mechanism, equipped with a high-temperature anti-sticking guide groove, with an angle of 45 degrees.
Fabric temperature measurement sensor device, including a refractory insulating rock wool support block and an armored platinum resistance thermometer, for measuring the temperature rise on the back of the specimen.
Counterweight copper hammer device, used to set a pre-tension of 175g ± 0.5g for the fabric.
A droplet counting device is provided, which can display the number and frequency of droplets during the test.
Equipped with standard testing software for resistance to molten metal splash impact performance, with a touch screen human-machine interface control, which can display test parameters such as temperature rise curves.
The whole machine is equipped with a protective cover to protect the safety of testers.
在线联系供应商
Other supplier products
 |
Qinsun Ci xenon lamp aging test chamber | The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc weathering testing instruments in the world. Their larg... |
 |
Shoelace wear tester丨Shoelace wear test mechine | Main uses: Shoelace wear tester is mainly used to evaluate the durability and wear resistance of shoelaces. In the test, the LACES are usually fix... |
 |
Nissan Scratch Tester ，ISO 1518 ，benchtop scratch mar tester | The Scratch Tester is designed to evaluate the scratch resistance of materials such as automotive interior plastics, exterior coatings, and decorat... |
 |
Suture Needle Cutting Force Tester | The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri... |
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load appl... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
