Pressure-Flow Transmission Analyzer
The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performance in fluid systems. The following is a detailed introduction to its main uses, compliance standards, and technical parameters:
Standards
The design and manufacture of the Pressure Transmission and Flow Tester need to comply with relevant industry standards and technical specifications to ensure the accuracy and reliability of test results. Common compliance standards include, but are not limited to: GB/T 19335 - 2022 General Technical Requirements for Disposable Blood - path Products, etc.
Main Uses
- Fluid System Performance Evaluation: The Pressure Transmission and Flow Tester can be used to evaluate the pressure transmission efficiency and flow characteristics of fluid systems under specific conditions, ensuring that the systems can meet the design and usage requirements.
- Product Quality Control: During the manufacturing process, this tester can be used for quality inspection of fluid system components (such as pipelines, valves, sensors, etc.) to ensure that product quality complies with relevant standards and regulations.
- Fault Diagnosis and Maintenance: By testing the pressure and flow data of fluid systems, it can help diagnose faults in the systems and provide a basis for the repair and replacement of faulty components.
- Research, Development and Optimization: In the design, research and development process of fluid systems, the tester can be used to test the effects of different design or improvement schemes, providing data support for optimizing system performance.
Technical Parameters
- Testing Range: - Pressure testing range: 0 - 10 KPa (standard configuration), which can be customized according to actual needs.
- Flow testing range: It depends on the specific model and configuration, usually covering a wide flow range.
- Accuracy: - Pressure testing accuracy: 0.5%FS (full - scale error) to ensure the accuracy of test results.
- Flow testing accuracy: It depends on the specific model and configuration, but also needs to meet high - accuracy requirements.
- Air Source Pressure and Interface: - Air source pressure: ≤0.7 MPa (the user provides the air source) to ensure the normal operation of the tester.
- Air source interface: Φ8 mm polyurethane tube or other standard interfaces, facilitating connection to air source equipment.
- Power Supply: - The voltage and frequency of the power supply vary according to the specific model. It usually supports a wide voltage range to adapt to the electrical standards of different regions. - External Dimensions and Weight:
- External dimensions: The main unit size is 300 mm(L)×410 mm(W)×150 mm(H) (the specific dimensions vary depending on the model), making it easy to place and operate.
- Weight: Moderate, easy to carry and move. - Other Functions: - Data recording and storage: It has the function of real - time data recording and storage, which is convenient for subsequent analysis and processing.
- Display and operation interface: It adopts a color touch - screen operation interface, supporting Chinese - English switching (or other languages). The interface is clear and easy to operate and use.
- Automatic calibration and fault diagnosis: Some models are equipped with an automatic calibration function to ensure the accuracy of test results. At the same time, they have a fault diagnosis function, which is convenient for timely detection and resolution of problems.
在线联系供应商
Other supplier products
 |
Carpet Combustibility Analyzer | Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te... |
 |
Fully Automatic AC/DC High - Voltage Tester for Wires and Cables | The fully automatic AC/DC high - voltage tester for wires and cables is specially used to test the insulation between wire cores or between wire co... |
 |
Flooring VOC Emission Tester | Standard ISO 16000-9(Indoor Air - Determination of Volatile Organic Compounds) ASTM D5116(Standard Guide for Small-Scale Environmental Chamber ... |
 |
Adiabatic Accelerated Calorimeter | Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
