Bearing Friction Torque Evaluation Device
Standards GB/T 32562-2016 JJF1137-2024 Main Purposes The bearing friction torque tester is a precision instrument specifically designed for measuring the friction torque of bearings. Its main purposes include, but are not limited to, the following aspects: Bearing Quality Assessment By measuring the friction torque of bearings, the quality level of bearings can be evaluated, including their manufacturing precision, material properties, and lubrication effects, etc. Bearing Optimization Design Friction torque data is an important basis for bearing optimization design. By testing the friction torque of bearings with different design schemes, their performance can be compared, and thus the best design scheme can be selected. Specification Measure the starting friction torque of miniature bearings; The bearing is rotated at 2rpm and the maximum friction torque, minimum friction torque and average friction torque of the bearing are measured during the time of 2 weeks of rotation, and the torque-time curve, torque-rotation angle curve, and rotational speed-time curve are drawn; It is equipped with the function of analyzing and storing data automatically and generating test report automatically; With data management function, it can query, playback and delete the test data; Torque measurement range: 0~100μN-m; Torque measurement error: 1μN-m; Speed setting range: 0~4rpm; Accuracy of rotational speed measurement: 0.5; Working environment: inside the ultra-clean room; Power supply: 220V±10%, 50Hz～60Hz; Working temperature: 5℃~35℃; Working relative humidity: 5% ~ 85%.
Other supplier products
|
|
Timken Test Machine |
Testing Standards
ASTM D 2509
ASTM D 2782
GB/T3142
SH/T0204
Applicable standards
Timken extreme pressure friction testing machines are usuall... |
|
|
Fully Automatic Stripping Machine for Automotive Wires |
The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for In... |
|
|
Metal Bone Screws Torque Tester |
Standard
YY/T 1506. ASTM F543:
The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ... |
|
|
Bag fastener magnetic buckle testing machine |
Product Introduction:
This machine is mainly used to test the durability of the finished magnetic buckle under the action of tension
Implementati... |
|
|
Fabric thickness |
Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for leather, rubber and textiles and other materials, the thic... |
供应产品
Same products
