Vacuum Environment Ball-on-Disk Tribometer
Standards
ASTMD4172-94
ASTMD2266-91
SH/T0189-92
Main Purposes
The vacuum ball - disk friction tester is a device specifically used for evaluating the sliding friction coefficient of point contact and the wear life of materials under vacuum and different atmospheric environment conditions. Its main purposes include:
Material Friction Performance Evaluation
- Simulate the actual friction conditions of materials in a vacuum or specific atmospheric environment, test the friction coefficient of materials, and evaluate their friction performance. - Test the friction behavior of materials under different loads and speeds to obtain friction performance data, providing a basis for material research, development, and optimization.
Wear Life Testing
- Calculate the wear life of materials by measuring the friction and wear conditions when the ball specimen rotates on the disk specimen. - Evaluate the performance changes of materials during long - term friction and wear processes, providing support for the assessment of material reliability and durability.
- Friction tests can be carried out in a vacuum environment to simulate the friction behavior in special application scenarios such as space and the nuclear industry.
- By adjusting the atmospheric environment, such as argon, nitrogen, etc., study the influence of different atmospheres on the friction performance of materials.
Lubricating Film Performance Evaluation
- For lubricating film materials, their wear life can be evaluated by testing the number of rotations before lubrication failure.
- Study the friction performance of lubricating films under different conditions to provide support for the research, development, and optimization of lubricants.
When the vacuum ball - disk friction tester conducts tests, it may need to comply with the following relevant standards or specifications (the specific standards may vary depending on the instrument model and application field):
Material Performance Testing Standards
Performance testing standards for specific material types, such as metallic materials, polymer materials, ceramic materials, etc.
Vacuum Environment Testing Standards
Such as standards and specifications regarding vacuum degree control and atmospheric environment simulation.
Technical parameters
Test standard: ASTM G99 G133 G59 G102 G119
Load: 0.25-200N
Speed: 0.1-3000rpm
Friction: 100N
Size: 650mm*400mm*700mm
Weight: 80KG
Power supply: 220V/50Hz
在线联系供应商
Other supplier products
 |
Plastic ball indentation hardness tester | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Surgical Mask Flame Retardant meter | Flame-retardant tester for surgical mask, In case of the mask is accidentally exposed to flame, its flame-retardant performance is directly related... |
 |
Vehicle Cabin Air Filter Test device | Applicable standards DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration ... |
 |
Shoelace wear tester | Main uses: Shoelace wear tester is mainly used to evaluate the durability and wear resistance of shoelaces. In the test, the LACES are usually fix... |
 |
Negative pressure tester for medical syringes | Main use The negative pressure tester is mainly used to test the physical characteristics of the body of the syringe, and is one of the impor... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
