Ignition Distance Measurer for Spray Aerosols
Product Description
Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance Test for Spray Aerosols and GB/T 21630-2008 Test Method for Ignition Distance for Dangerous Goods Spray Aerosols.
Standards
GB/T 21630-2008
GAT536
NY/T 1860
Product Features
1. It adopts an embedded processor and the Windows CE operating system.
2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
3. It integrates two working modes: the "standard mode" and the "custom mode".
4. The aerosol sprays automatically, and the aerosol can clamping device can automatically make the can stand upright or turn it upside - down.
5. The nanosecond - level photosensitive sensor detection module automatically detects whether the spray is burning.
6. Driven by a hybrid stepping motor and equipped with an optical encoder, it enables precise positioning of the measurement position.
7. It uses a spark lighter as the ignition source, producing a blue - colored non - glowing flame with a height of 4 - 5 cm, and the flame height is adjustable.
8. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
9. The dedicated fire - proof accordion cover can effectively prevent equipment contamination.
10. It is equipped with a temperature and humidity module to monitor the temperature and humidity of the test environment in real - time.
Technical parameters
|
Operating Environment |
(5~40)℃, <85%RH |
|
Ambient Temperature Measurement Range |
(-10~+60)℃ |
|
Ambient Temperature Measurement Accuracy |
±0.5℃ |
|
Ambient Humidity Measurement Range |
(5~95)%RH |
|
Ambient Humidity Measurement Accuracy |
±5.0%RH |
|
Flame Detection Response Time |
≤6ms |
|
Flame Detection Distance |
(15~90)cm |
|
Positioning Accuracy |
±1mm |
|
Minimum Pressing Duration |
5s |
|
Ignition Method |
Gas Igniter |
|
Aerosol Tank Positioning |
Aerosol canisters can be turned over automatically |
|
Compatible Spray Tank Dimensions |
Height (120~400)mm, Diameter (30~80)mm |
在线联系供应商
Other supplier products
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
Protective Clothing Synthetic Blood Penetration Tester | Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test press... |
 |
Helmet Xenon Aging Tester | The helmet xenon lamp aging tester is a device that simulates the damage caused by long-term exposure of helmets to ultraviolet radiation from sunl... |
 |
Safety shoe impact tester | According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344. ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 22... |
 |
Cell thickness gauge | The Cell Thickness Gauge is a precision measuring instrument designed for accurate thickness measurement of lithium-ion battery cells. The system i... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
