Protective garment resistance evaluation device
Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-static Performance - Test Method for Resistance Through the Material (Vertical Resistance) GB 12014 - 2009 Anti-static Clothing GB/T 12703.4 - 2010 Textiles - Evaluation of Electrostatic Properties - Part 4: Resistivity EN 1149 - 1 - 2006 Protective Clothing - Electrostatic Properties - Part 1: Surface Resistivity Test Method and Requirements EN 1149 - 2 - 1997 Protective Clothing - Electrostatic Properties - Part 2: Resistance Through the Material - Vertical Resistance Test Method AATCC 76 Fabric Surface Resistivity ANSI / ESD STM2.1 Anti-static Clothing Resistance Test Method - American Standard Scope of Application This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying with different testing standards such as national standards and European standards. It is equipped with the TEST V1.6 dedicated testing software, which can realize online operation, automatically complete the sample test according to the standard regulations, process the test results, edit and print the test reports. Instrument Configuration Standard configuration of the instrument: (1) 1 set of computer operating system software (2) 1 main unit of the tester (3) 1 set of standard point-to-point heavy hammer electrodes for the instrument (4) 1 set of standard ring combination electrodes for the instrument (5) 2 measurement cables; 1 power cord. (6) 1 user manual; (7) 1 certificate of conformity; (8) 1 packing list. Technical Parameters Resistance measurement range: 104Ω ～ 1016Ω. LCD display: Surface resistance, temperature, current, voltage, test time, and test sample data can be input; units can be switched (mm, cm, m). Built-in test voltage: Any value from 0 - 1000V can be set. Basic accuracy: < 1G ± 1%; >= 1G ± 3%; >= 1T ± 10%. The accuracy deviation values in different ranges are different. Operating environment: Temperature: 0℃ ～ 40℃, relative humidity < 80%. Internal test voltage: Any value from 10/50/100/250/500/1000V can be set. Power supply: AC 220V, 50HZ, power consumption is about 5W. Measurement mode: Manual/automatic range. With PC testing software (optional), USB communication interface, and the software interface synchronously displays, analyzes, saves and prints data! Common electrode (fixture) device options: Type A: Heavy hammer electrode (for point-to-point resistance test of fabric surface) Type B: Ring combination electrode (for fabric surface resistivity test and fabric vertical resistance test) Dimensions of the main unit: 330mm * 340mm * 120mm
Other supplier products
|
|
Foam Repeated Compression Tester |
Product Description:
Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression ... |
|
|
Rubber non-rotor vulcanization Tester |
Non-rotor vulcanizer is a rubber processing industry control rubber material quality, rapid inspection and rubber basic research and application in... |
|
|
Fabric light transmittance test machine |
Light transmittance test machine for fabric is used to determine the total visible light transmittance of the fabric to evaluate the shading proper... |
|
|
Fiber crimp elastometer |
Product Introduction:
YG362C fiber crimp elasticity meter is used for crimp degree of 1-22dtex fiber.
Crimp elasticity, crimp recovery rate index... |
|
|
Carpet Peel Strength and Tuft Bond Tester |
Product Details
For tufted carpets or traditional carpets, an important parameter is the retention performance of their tufts.
Poor - quality car... |
供应产品
Same products
