Building Material Smoke Toxicity Tester
Introduction：
Building Material Smoke Toxicity Test Equipment plays a critical role in assessing the safety of construction materials. In the event of a fire, smoke and the toxic gases it carries pose a significant threat to human life. Smoke can cause disorientation, incapacitation, and even death due to the inhalation of harmful substances. The purpose of smoke toxicity testing is to predict and confirm the lethal toxic potency of smoke produced when materials are exposed to specific fire conditions, aiding in fire hazard analysis.
Technical parameters:
The ring furnace is heated, and the sliding module drives the ring furnace to move automatically to meet the quartz tube heating requirements.
The operating temperature can reach 1000° C, accurate temperature control, the temperature error is less than 1°C, the movement speed :10MM/MIN, the moving distance 750MM;
Equipped with high temperature resistant thermocouples for ring furnace temperature measurement and ring furnace combustion
The calibration of heat is equipped with a high-temperature quartz boat, and the sample is stored in a quartz tube to be heated and decomposed:
Thermocouple: Outer diameter 1.5MM high temperature resistance 0-1000 degrees;
Equipped with rotor flow meter for carrier gas and dilution gas supply, equipped with convenient control of high-precision valve body for gas switching;
Acrylic poison box, you can watch the movement of mice inside the window.
在线联系供应商
Other supplier products
 |
Carpet Flammability Tester | Standards: BS 4790. ISO 6925. BS 6307 Applications: The Flammability Tester is used to test the effects of a small source of ignition on floor c... |
 |
Building material combustion calorific value calorimeter | Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and ... |
 |
Thermal Insulation Rock Wool Thermal Load Tester | Introduction： This equipment determines the temperature at which rock wool insulation shrinks under a specified load when heated at a controlled r... |
 |
Blankets Flammability Tester | Introduction The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surfa... |
 |
Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester | I. Applicability Scope This system applies to combustion performance testing of non-metallic materials in aircraft cabins: 1.1 Crew/Passenger Cab... |
Same products
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
