Thermal Insulation Material Smoldering Tester
Product Introduction:
Thermal insulation material smoldering test furnace is a performance test device, using intelligent touch screen control system, convenient and fast, easy to operate, widely used in construction, transportation, light industry, electronics, energy and many other fields, is a very practical industrial test equipment.
This testing apparatus meticulously simulates conditions under which smoldering ignition might occur in thermal insulation materials. It typically involves exposing a specimen of the insulation to a standardized heat source, such as a heated wire or a small flame, under controlled airflow conditions. The tester monitors parameters like the time to ignition, the rate of smoldering spread, the maximum temperature reached, and the duration of smoldering. These measurements provide critical data on the material's propensity to smolder and its ability to self-extinguish.
Applicable standards:
DB11/381-2016 Appendix D Test method for smoldering performance of thermal insulation materials
Technical parameters:
1. Ambient temperature: 20℃ —— 40℃
2. Voltage: 220V±10V 50HZ power 2500W
3. Weight: 35kg
4. Data acquisition interval lt; 2s
5. Heating rate: 5℃/min
6. Test time: 24h
7. Test temperature: room temperature —— 400℃
8. Thermocouple: K-type armored thermocouple
9. Temperature measurement range: (0 —— 1000)℃
在线联系供应商
Other supplier products
 |
Safety Helmets Against Molten Metal Splashing Tester | Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection –... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ... |
 |
Battery impact tester | The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） diameter rod placed in a cross position over the center of the ... |
 |
Electrochemical Corrosion-Wear Combined Tester | Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body fluid... |
 |
Coating thickness gauge film thickness tester | Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
