Carbon Fiber Packing Impregnated In Graphite
![](/images/advert_8_1d7b813d77ada92b4c5998ec42a3cde9.png)
JFY-3200S Carbon fiber packing impregnated in graphiteDescription:Carbon fiber packing impregnated in graphite is diagonally braided from pure carbon fibres,Website:, with a special graphite impregnation and a silicone-free lubricant. It lacks the usual stiffness of pure carbon packings, it has superb thermal conductivity and a very low coefficient of friction. Contrary to many packings made from synthetic fibres, it does not shrink, even if subjected to high temperature: no shrinkage at temperatures of up to 300 C thanks to its outstanding dimensional stability. Because of the excellent chemical and mechanical properties of carbon, this packing is resistant against most aggressive and abrasive media.Application areas:Multi-purpose packing usable for a very wide range of applications. Particularly well suited for all demanding dynamic applications, like boiler-feed-pumps, mixers, agitators, refiners, etc., but also for static applications like valves, autoclaves, reactors, etc., in a wide variety of industries like power stations, pulp and paper, pharmaceutical, the chemical and petrochemical industry and many more.Application media:It can be used with nearly all media, from hot and cold water, waste water, alcohol, solvents, to aggressive chemicals and gases, heat transfer agents etc.Advantages:Because its coefficient of thermal expansion is similar to that of steel, it needs minimal adjustments of the gland which reduces maintenance expenditure. The very low coefficient of friction results in low shaft wear and assures regular running of pump.Not suitable for: Highly concentrated corrosive acids.Technical data:RotatingReciprocatingValvesPressure3 Mpa10 Mpa30 MpaShaft speed:15m/s rotaryTemperature-150 to +850PH range0~14Other types:JFY-3240 carbon fiber packing reinforced by Inconel wire in each strandNot suitable for:Highly concentrated corrosive acidsPackage:5kg/roll, 10kg/roll.Supply OEM products.
Other supplier products
|
|
JFY-5209 Spun Aramid fiber packing impregnated with PTFEDescription:Diagonally braided from continuous spun Aramid fibers. Compared with JFY-5200 i... |
|
|
JFY-1200Z Graphite packing with ZincDescription:Compared with ordinary graphite packing,Website:, it has the similar properties. But due to corrosi... |
|
|
JFY-17004 Graphite packing with carbon fiber cornerDescription:It is diagonally braided from pure expanded flexible graphite,Website:, reinforced a... |
|
|
JFY-SWG100 Spiral wound gasketDescription:Spiral wound gasket is formed of V-shaped W--shaped metallic stripe and soft non-metallic filler by means... |
|
|
JFY-4104 PTFE yarn with lubricant oilDescription:JFY-4104 PTFE with lubricating oil is made from JFY-4103 impregnated with silicone oil.JFY-4104 PT... |
供应产品
Same products