LiF Optical Crystals
DescriptionLiF (Lithium Flouride) crystals shows excellent transmittance in the VUV region. It is used for windows,Website:, prisms, and lenses in the visible and infrared in 0.104 μm - 7 μm. LiF crystalis sensitive to thermal shock and would be attacked by atmospheric moisture at 400°C. In addition irradiation produces color centers. Modest precautions should be taken against moisture and high energy radiation damage. Besides LiF is softens at 600°C and is slightly plastic that can be bent into radius plates. The material can be cleaved along (100) and less commonly (110). Although the optical characteristics are good the structure is not perfect and cleavage is difficult. High quality LiF is usually grown by modified Bridgman technique.Lithium Flouride shows good optical properites. It can be used for windows, prisms and lenses in the vacuum UV,visibel and infrared. Because of its paricular lattice structure, LiF can also be used as X-ray diffraction devices. Features:Excellent Transmission from 110nm to 7μm;Optically isotropic, middle hard;Hygroscopic, unsolvable in water;Sensitive to thermal shock,Cleaved along (100);
SpecificationPhysical PropertiesCrystal typecubicLattice constant, Åa=4.026Density, g/cm32.64Melting point,℃870Refractive index @ 1.0μmn=1.387Transmission range, μm0.12-6Specifications for LiF windowsSpectal rangeUV, VIS, IRSurface quality60-40 S & DClear aperture90% of the diameterdiameter tolerance+0, -0.1 mmThickness tolerance±0.1Surface flatnessλ/4 @ 633 nmparallelism<3 arcminPolishing Specification for Optical GradeⅠOrientation Tolerence< 1°Thickness/Diameter Tolerance±0.10 mmSurface Flatness<(λ-2λ)@632nmWavefront Distortion<(2-4)λ@632nmSurface Quality80/50Parallel10ˊPerpendicular60ˊClear Aperture>90%Chammfer<0.2×45°Polishing Specification for Optical Grade ⅡOrientation Tolerence< 0.5°Thickness/Diameter Tolerance±0.10 mmSurface Flatness<(λ/2-λ/4)@632nmWavefront Distortion<(1-2)λ@632nmSurface Quality60/40Parallel1ˊPerpendicular30ˊClear Aperture>90%Chammfer<0.2×45°Polishing Specification for Optical Grade ⅢOrientation Tolerence< 0.2°Thickness/Diameter Tolerance±0.02 mmSurface Flatness(λ/4-λ/6)@632nmWavefront Distortion<(λ-λ/2)@632nmSurface Quality40/20Parallel45〞Perpendicular20ˊClear Aperture>90%Chammfer<0.2×45°
Other supplier products
|
|
|
YCOB nonlinear crystalsYttrium calcium oxy borate（YCa4O(BO3)3,Website:）crystal was good materials for nonlinear optical and high temperature piezoe... |
|
|
|
YbCaF2laser crystals Yb:CaF2is a good materials for use indiode-pumped femtosecond (fs) lasers and amplifiers.Features:
• Low quantum defect
•... |
|
|
|
DescriptionHigh temperature form BBO (α-BaB2O4) is an excellent negative uni-axial birefringent crystal. It has large birefringence coefficient and... |
|
|
|
NdYAG laser crystalNeodymium Doped Yttrium Aluminum Garnet - Nd:YAG laser crystal is the most popular lasing media for solid-state lasers. Feature... |
|
|
|
Yb:YAGYb:YAG (Ytterbium doped Yttrium Aluninum Garnet,Website:, Yb:Y3Al5O12) is a good diode-pumping crystals for high power laser.Features:High sl... |
供应产品
Same products
