Stainless Steel Pipe Stub End
Pipe Stub End During flanging process, the work blank margin usually is not deformation zone because it is restricted by blank holder force and the ratio between the width of the margin and bore diameter is pretty large. The deformed wall serves as force transferring area. The bottom with hole is deformation zone, which is driven by two-directional tensile stress (tensile stress along thickness direction is negligible). Deformation zone will become thinner under the effect of tensile stress, which belongs to the same principle of bulging. For stub end with non-circular inner bore, strain and stress distribution of deformation zone is uneven along the flanging line. With the same flanging height, the part with smaller radius of curvature has larger tangential stress and tangential deformation, while the part with larger radius has smaller tangential stress and tangential deformation.Pipe Stub End Standard:GB/T12459-2005 ASME B16.9-2007, ASME B16.25-2007 MSS SP 43-2008 BS, BS, BS, BS AFNOR NF A , AFNOR NF A , AFNOR NF A , AFNOR NF A Available sizes range we can produce: Outside diameter : 1/2"~24", DN15~DN600 Thickness : SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS, SCH5S, SCH20S, SCH40S, SCH80S. The largest thickness reaches 200mm.Pipe Tee Material : Carbon steel: ASTM/ASME A234 WPB - WPC Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911 Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6 High-performance steel: ASTM/ASME A860 WPHY
Other supplier products
|
|
|
Bending pipe As a professional pipe fittings manufacturer in China, We have cutting-edge techniques and advanced pushing machine and heating and be... |
|
|
|
PIPE CAP Pipe cap is usually welded onto the end of a pipeline or screwed into the external thread on a pipe end to block up the pipe. Generally, i... |
|
|
|
Pipe Elbow In 2014 year ,Website:, Our new fittings and flange factory start production, owns cutting-edge techniques and advanced production equi... |
|
|
|
Carbon steel/Alloy steel/Stainless steel Seamless and welded PIPE CROSS As a type of fittings, pipe cross is usually installed at the intersection ... |
|
|
|
Cold Drawn/Hot Rolled/Hot Expanded Line pipe API 5L grade B/X42/X46/X52 psl-1/psl-2 high quality API approved seamless steel pipe with black painti... |
供应产品
Same products
