Carbon Steel/Alloy Steel /Stainless Steel Pipe Reducer Concentric And Eccentric Pipe Reducer
PIPE REDUCER As one type of industrial fittings, reducing pipe is mainly used for connection between two pipelines with different diameters. Generally, pipe reducers can be divided into concentric reducer and eccentric reducer. The former is often used on vertical pipelines, while the latter is usually installed on horizontal pipelines. Sometimes, flow rate can't change two much when the flow increases or decreases in a pipeline. The reducer is perfect for this situation. It is able to effectively prevent cavitation when installed in the inlet of a pump. The reducer is also needed at the joint points of an instrument such as flow meter or control valve to coordinate with the instrument.Pipe Reducer Standard:GB/T12459-2005, GB/T13401-2005, GB/T10752-2005 SH/T3408-1996, SH/T3409-1996 SY/T0609-2006, SY/T0518-2002, SY/T0510-1998 DL/T695-1999, DL/T473-1992 GD2000 GD87-1101 HG/T21635-1987, HG/T21631-1990 ASME B16.9-2007, ASME B16.25-2007 MSS SP 75-2008, MSS SP 43-2008 CSA Z245.11-05-2005 EN, EN, EN, EN DIN, DIN BS, BS, BS, BS, BS GOST17376-2001 AFNOR NF A , AFNOR NF A , AFNOR NF A , AFNOR NF A , AFNOR NF A ISO3419-1981, ISO5251-1981 JIS B2311-2009, JIS B2312-2009, JIS B2313-2009Available sizes range we can produce: DIMENSIONSSEAMLESS TEEWELDED/SEAMED TEEOUTER DIAMETER1/2"~32"6"~60"NOMINAL DIAMETER15MM~800MM150MM~1500MMWALL THICKNESS4MM~200MMPipe Reducer Material : Carbon steel: ASTM/ASME A234 WPB - WPC Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911 Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6 High-performance steel: ASTM/ASME A860 WPHY
Other supplier products
|
|
|
Weld neck flange Weld neck flange features high deformation resistance.great sealing performance,wide application range,good rigidity,resilience an... |
|
|
|
PIPE CAP Pipe cap is usually welded onto the end of a pipeline or screwed into the external thread on a pipe end to block up the pipe. Generally, i... |
|
|
|
Carbon steel/Alloy steel/Stainless steel Seamless and welded PIPE CROSS As a type of fittings, pipe cross is usually installed at the intersection ... |
|
|
|
Cold Drawn/Hot Rolled/Hot Expanded Line pipe API 5L grade B/X42/X46/X52 psl-1/psl-2 high quality API approved seamless steel pipe with black painti... |
|
|
|
Cold Drawn/Hot Rolled/Hot Expanded Line pipe API 5L grade B/X42/X46/X52 psl-1/psl-2 high quality API approved seamless steel pipe with black painti... |
供应产品
Same products
