.

low carbon tundish hollow particle covering powder

low carbon tundish hollow particle covering powder

The tundish cover powder is a kind of auxiliary material for steelmaking. And is mainly composed of SiO2,CaO,Al2O3, MgO etc.with the sequential process of grinding, mixing, crushing and packing. Tundish covering flux is mainly use high alkalinity to reduce oxide inclusion and high oxygen content in the steel, and avoid molten steel pollution because of chemical reaction between SiO2 in slag and Deoxidizer in steel. Tundish covering flux could effectively improve the Desulfurization effect of molten steel,and thus effectively improve the cleanliness of continuous casting molten steel.
Applicable steel: carbon content in molten steel C≤0.08
The steel has good spread ability, not skulling ,purified molten steel, prevent molten steel from secondary oxidation. Elimate the risk of carbon pickup.

Tel:

Mobile:

Web:



在线联系供应商

至: Luoyang Casting Trading CO. LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

good heat preservation stainless steel mould flux for 200 type
good heat preservation stainless steel mould flux for 200 type good heat preservation stainless steel mould flux for 200 type They are composed essentially of CaO-Al2O3-SiO2 with addition of fluxing agents and ...
continuous casting mould flux for 200 type
continuous casting mould flux for 200 type continuous casting mould flux for 200 type They are composed essentially of CaO-Al2O3-SiO2 with addition of fluxing agents and carbon. Mold fluxes ...
 slag layer in billet mould flux
slag layer in billet mould flux slag layer in billet mould flux The Billet mould flux series for open casting mould is one type of mould flux and mainly used in the continuous cas...
300 type stainless-steel mould flux
300 type stainless-steel mould flux 300 type stainless-steel mould flux Mold flux has major influence on the quality of continuous casting slab and yield of caster. Therefore, mold fl...
Open casting billet mould flux
Open casting billet mould flux Open casting billet mould flux The Billet mould flux series for open casting mould is one type of mould flux and mainly used in the continuous cast...
供应产品

Same products

SCC L8013Cr 2-7/8 EUE Tubing Coupling SSC
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing...
Special Clearance 1.9 N80 NUE Tubing Coupling
Special Clearance 1.9" N80 NUE Tubing Coupling 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
DS55/HT55/HST55 4145h Crossover
DS55/HT55/HST55 4145h Crossover 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
X-over 3-7/8CAS 2Cr13 Crossover
X-over 3-7/8"CAS 2Cr13 Crossover 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
JFE BEAR Thread Type Super 13Cr Crossover
JFE BEAR Thread Type Super 13Cr Crossover 卖方: Tianjin Wenxin Energy Technology Co.,LTD Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...