哈氏合金 B 丝网
哈氏B
化学成分(%):
哈氏B镍钼铁C碳Mn锰硅带够的CR
最小58.026.04.0
最大64.030.06.00.051.00 1.000.030 0.0301.00
物理力学性能:
熔点(℃)1330至1380年
拉伸强度(M / PA)860-1525
特点:
1。还原环境优良的耐腐蚀性
2。一个很好的抵抗浓度硫酸介质中,大量的非氧化性酸腐蚀
3。一个很好的抵抗,减少氯离子应力腐蚀开裂
4。良好的耐腐蚀性的各种有机酸
应用范围:
哈氏B被发现在核武器和化学反应器,管道和阀门在不同的化学工业中广泛使用。
产品规格:
丝ASTM B573直径:0.05毫米-10.0毫米,
0.002英寸至0.3937英寸
丝网GB / T5330.1
GB/ţ17492
JB / T91550.5-250目/英寸
厚度:Min0.05mm
板材的ANSI / ASTM B434厚度:0.05mm及以上
在线联系供应商
Other supplier products
| 哈氏合金 B 丝网 | 哈氏B 化学成分(%): 哈氏B镍钼铁C碳Mn锰硅带够的CR 最小58.026.04.0 最大64.030.06.00.051.00 1.000.030 0.0301.00 物理力学性能: 熔点(℃)1330至1380年 拉伸强度(M / PA)860-1525 特点: 1。... | |
| 304不锈钢丝网 | 304不锈钢 化学成分(%) 铬镍钼铁Ç硅锰P级铜 ≤ 18.0-20.08.0-10.54.0-5.0 BAL0.081.0 2.00.05 0.03 机械性能: 拉伸强度(M / PA)20℃520 硬度(HV)20℃160-210 特点: 1。成型和... | |
| 90/10铜镍丝网 | 90/10铜镍合金 化学成分(%) 合金名称铜镍铁,铅 90-10铜镍合金C70600〜899.0 - 11.01.0 - 1.8<0.05 机械性能: 拉伸强度(M / PA)20℃≥275 屈服强度为0.2%(MPA)20℃≥105 特点: 1。优异的抗生... | |
| Cr20Ni80 丝网 | Cr20Ni80 化学成分: 镍铬%%铁%硅%的锰 巴尔201最大1-1.501最大 物理力学性能: 熔点(℃)1400 拉伸强度(M / PA)630-900 特点: 1。良好的变形能力,热稳定性好,机械性能,热状态和抗氧化能力防震 2。强烈建议电阻加热器工作在高温下运行循... | |
| 钼丝网 | 钼 钼级360361365 物理和机械性能 拉伸强度KSI(RT)150 兆帕(RT)1035 硬度苯妥英钠230 熔点2623°C间 特点: 1。优异的电气和导热能力和较高的抗拉强度。 2。导热系数比铁或镍合金,高约50%。 3。所有难熔金属的电导率最高,约三分之... |
Same products
| 2-in-1 Shimmer Eyeshadow Stick & Eyeliner Pencil | 卖方: Zhejiang Meixi Cosmetics Co., Ltd. | Dual-Use Design Can be applied as a shimmer eyeshadow for full eyelid coverage or as an eyeliner ... | |
| 99.5% high-purity chromium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | Chromium carbide powder has excellent wetting properties and is firmly bonded to metal substrates... | |
| Carbonitride powder for plastic modification | 卖方: 株洲华斯盛高科材料有限公司 | The particle morphology of this powder can be controlled, and it can be made into spherical, near... | |
| Titanium carbide hard alloy drive wheel accessory | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel is customizable with various groove geometries—including V-shaped, U-shape... | |
| Industrial titanium carbide alloy drive wheels | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel can be customized with various slot shapes according to the specifications of wi... |















