5754 CC DC route mill finish Aluminum sheet/plate/coil price
Product Description
Alloy 5754()is a typical aluminium-magnesium alloy which is closely related to the alloys 5454 and has higher strength than 5251. The most common tempers for 5754 aluminium are shown as O, H22, H24, H26, H32, H111 and etc. This alloy has excellent corrosion resistance especially to seawater and industrially polluted atmospheres. In particular, mechanical property requirements vary widely with temper, product and product dimensions. Mingtai Al. specializes in 5754 aluminum plate and sheet since 1997 so that has a wide range of sizes available to fully satisfy customer’s requirement. We offers Alloy 5754 which corresponds to ASTM B 209, EN 485-2, EN 573-3, EN 754-2 standard designations and specifications but may not be a direct equivalent
Alloy No. |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
||
5754 |
0.40 |
0.40 |
0.10 |
0.50 |
2.6-3.6 |
0.30 |
0.20 |
0.15 |
0.20 |
REMAIN |
||
5754 Aluminum Alloy Products |
||||||||||||
Products |
Type |
Temper |
Thickness(mm) |
Width(mm) |
Length(mm) |
|||||||
5754 Aluminum Sheet |
Painted, Bare, Mill Finish Tread plate |
O H22 H24 H26 H32 H111 |
0.15-3.0 |
500-1600 |
500-16000 |
|||||||
5754 Aluminum Plate |
3.0-150 |
Up to 3100 |
Up to 6000 |
|||||||||
5754 Tread Plate |
0.8-7.0 |
100-2600 |
500-16000 |
Strength of Mingai
Excellent Welding capabilities and good corrosion resistance makes 5754 aluminum plate an idea metal for most processing techniques. The light weight materials enable you to customize precious size at you demand. Using aluminum in many fields gives the consumer a sense of quality and value that they expect from their products. The 5754 aluminum plate supplied by us are accepted by clients in various spheres of the industries ranging from basic industries to more complex such as oil&gas, petrochemical, chemical & fertilizers, power generation and nuclear industries.
Pre-sales Service:
1. For partial materials, we can supply the sample free (without the freight charge).
2. Customers are welcomed to visit the factory.
After Sales Service:
1. Quality assurance certificate will be supplied with products
2. The customer can claim for compensation if the products are not check with the sample.
3. The products could be returned due to products quality.
Payment terms
30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C.
Pre-sales Service:
1. For partial materials, we can supply the sample free (without the freight charge).
2. Customers are welcomed to visit the factory.
After Sales Service:
1. Quality assurance certificate will be supplied with products
2. The customer can claim for compensation if the products are not check with the sample.
3. The products could be returned due to products quality.
Payment terms
30% deposit by T/T before production, and the other 70% balance should be paid by T/T before delivery. And we also accept L/C.
Q1:WhencanIgetyourreplyaftertheinquiry?
Q2:Whatarethetermsofpayment?
A2:Wecanaccept100%irrevocableLCatsight,deposit30%T/T,etc.
Q3:Whatkindsofalloycanyousupply?
A3:1xxx-8xxxxseries.
Q4:WhatifIwanttoknowmoredetailsaboutyourcompanyandproducts?
A4:Pleasekindlyrefertoourofficialwebsiteat formoreinformation.
在线联系供应商
Other supplier products
Rust-Proof 5754 Aluminum Plate For Door Material | Product Description5754 aluminum alloy is a typical alloy of Al-Mg elements with moderate strength, excellent processing performance, good corrosio... | |
good price aluminum sheet / aluminum plate 5005 5052 5083 5754 5251 | 5251aluminum alloyis Al-Mg antirust aluminum alloy, no heat treatment. The magnesium content of the alloy is low, the plasticity is high, the for... | |
High Qualified 3104 H22/24 Aluminum Sheet for Sale | Product Description 3104 aluminum sheet()belongs to the a series of AL - Mn alloy, deformation of it is aluminium alloy, the main state is H111/0... | |
high quality 6061 aluminum alloy for solar photovoltaic stent | Product Description 1, 6061 aluminum plate ()has excellent processing performance, good corrosion resistance, high toughness and processing after... | |
7075 Aluminum Sheet For aircraft on the lower wing panels | Product Description 7075 aluminium plateis Al-Zn-Mg-Cu super-hard aluminum, is a cold treatment of forging alloy, high strength, high hardness, f... |
Same products
炊具用铝圆片1050 1060 3003 不粘锅用铝圆片批发 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 铝合金的轻便性和优良的导热性能使其成为制作炊具的优质材料,特别适合于需要快速加热和均匀热分布的烹饪环境,如户外烹饪或家庭使用.通常采用1050,1060,3003等铝合金。因其导热性、轻质耐用性... | |
1050 1060 1100 3003不粘锅用铝圆片出厂价 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 铝合金因其重量轻、导热快、易于加工成型,是世界上最常用的炊具材料。各类不粘锅大多也采用铝合金作为基材。铝圆盘用于制造厨房用具,新材料的使用已经非常成熟。1050、1060、1100、3003铝圆... | |
工业纯铝板出厂价 1050 1060 1070 1100 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 纯度可以达到99.00%以上铝板被称为纯铝板,工业纯铝板常用的合金代号有1050、1060、1100。在所有铝板系列中纯铝板系列属于含铝量最多的一个系列。1系铝板具有密度小,易加工,耐腐蚀,导电... | |
屋顶板用彩涂铝板厂家 1100 3003 5005 6061 8011 | 卖方: Henan Hongchang Aluminum Co., Ltd. | 彩涂铝板是对铝基材表面进行油漆着色处理,常见的有氟碳彩涂铝卷,聚酯彩涂铝卷,常用合金号有AA1050、1060、1100、3003、3004、3105、5052、5005、5754、5083、6... | |
3004 Aluminium Sheet | 卖方: China Aluminium Industry Supply Chain (Tianjin) Co., Ltd | Aluminum alloy 3004 is a medium strength aluminum alloy with manganese and magnesium as its prima... |