90°Bends Pipe Fittings
Product Details
90 ° Bends
OD:1 / 2 "-48"
WT:SCH20,STD,SCH40,SCH80,SCH160,XXS
1) 90 °Bends Pipe Fittings bend, large bend, RX 2 D 3 D 5 D.
2) Standard: ANSI B16.9 / 16.28 ASME B36.10M-1996GB/T API 5L JIS P2311 / 2312 / DIN2605 / 2615 / 2616 / ASME B36.10M-1996GB/T 12459a et al.
3) material: ASTM A234 WPB, carbon steel, stainless steel, low alloy, etc.
4) Model: 1 / 2 "-72"
5) thickness: SCH20,STD,SCH40,SCH80,SCH160,XXS
6) Surface treatment: black antirust oil, transparent oil, hot galvanizing or according to customer's special requirements
7) packing information: fumigation free wooden box, tray can be specially packed according to customer requirements
8) time of shipment: according to customer's request
9) Product quality: has passed ISO9001 international certification
10) applications: widely used in petroleum, chemical, nuclear power plants, food manufacturing, construction, shipbuilding, paper making, medicine, etc.
Surface treatment: paint rust-proof, cold galvanizing and hot galvanizing treatment.
High pressure bends can be divided into three types according to the type of parts. The first type is high pressure pipe fittings with variable diameters. The axis is a straight line or a two-dimensional curve with a small bending degree. The cross-section shape is mostly circular or rectangular, because of the great difference in the circumference of the fittings or sections. The axis of the part is two-dimensional or three-dimensional curve parts, the section shape is rectangular, polygon or special-shaped, the axial direction does not need to feed when forming, the third kind is three-way pipe, four-way pipe or multi-pass high-pressure pipe fitting, the third kind is three-way pipe, four-way pipe or multi-pass high-pressure pipe fitting, the third kind is three-way pipe, four-way pipe or multi-pass high-pressure pipe fitting. One of the more difficult non-symmetric Y-type three-way high-pressure pipe fittings.
High pressure pipe forming process:
The production process of hot rolling (extruding high pressure bends): round tube billet is heated and perforated with three high cross rolling, continuous rolling or extruding pipe is fixed diameter (or reducing diameter), cooling and straightening water pressure test (or flaw detection) is put into storage.
The raw material of rolling high pressure bend pipe is round tube billet, the round tube embryo must be cut by cutting machine to grow the billet of about one meter, and send it to the furnace through conveyer to heat. The billet is heated in a furnace at about 1200 ℃. The fuel is hydrogen or acetylene. Temperature control in furnace is a key problem. The high-pressure tube billet shall pass through the pressure piercing machine after the tube billet comes out.
Generally, the common perforating machine is conical roller piercing machine, which has high production efficiency, good product quality, large perforation and expanding diameter, and can be used in many kinds of high pressure pipe fittings. After perforation, high-pressure bend tube billet has been three-high cross-rolling, continuous rolling or extrusion.
The diameter of the tube should be removed after extrusion. The sizing machine rotates through the cone bit at high speed and punches into the steel embryo to form high-pressure pipe fittings. The inner diameter of the high-pressure pipe fittings is determined by the outside diameter length of the drill bit of the sizing machine.
After the pipe fitting is fixed, it enters the cooling tower and is cooled by water spray. After cooling, the pipe fitting will be straightened. After straightening, the fittings are sent to metal flaw detector (or hydraulic test) by conveyer for internal flaw detection. If there are cracks, bubbles and other problems inside the pipe, will be detected.
The technological process of cold drawing (rolling) high pressure bend pipe: round tube billet is heated and perforated and the head is annealed with acid pickling oil (copper plating) and several times cold drawing (cold rolling) billet tube heat treatment and straightening water pressure test (flaw detection) mark is put into storage.
If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you.
contact us any
Other supplier products
|
|
ASTM A210 Seamless Carbon Super Heater Tubes |
ASTM A210 Seamless Carbon Super Heater Tubes
Grade :A210A1、A210C
OD:12.7 to 127 mm
WT:0.9 to 12.7 mm
ASTM A210 is the standard covers... |
|
|
Seamless Line Pipe |
Seamless line pipe operating environment of the pipeline, long lines, and not easy to maintain, the quality requirements are very serious.The main ... |
|
|
ASTM A333 Low Temperature Welded Steel Pipe |
ASTM A333 standard specification for seamless and welded steel pipe for low-temperature service and other applications with required notch toughnes... |
|
|
90°Bends Pipe Fittings |
Product Details
90 ° Bends
OD:1 / 2 "-48"
WT:SCH20,STD,SCH40,SCH80,SCH160,XXS
1) 90 °Bends Pipe Fittings bend, large bend, RX 2 D 3 D 5 D... |
|
|
Socket Welding Flange |
Grid: DN25-DN100, 1 "-4"
Body material: SUS304,SUS316L
Form of connection: welding, clamps, threads
Sealing ring material: EPDM, FPM, SI
Surfac... |
供应产品
Same products
