Steel Bloom
Description of Steel Bloom
Usually, during hot rolling, the bloom is a semi-finished nearly square solid metal form between the ingot and the billet. The cross-section of the slab bloom is usually greater than 225 square centimeters and about 8 to 12 meters long. In the rolling mill, it is broken down into finished products such as bars, beams and sheet piles. In earlier mills, ingots were made from cast ingots (called "nodular iron"), but in modern mills they are made by continuous casting.
Production Procedure of Steel Bloom
The ingots, still hot sometimes, reach the tram plate mill and billet mill and are placed upright in a soaking pit under the floor by a special crane. Steel bloom are rectangular gas chambers about 5 meters deep, in which four to eight ingots are simultaneously heated to about 1,250°C (2,300°F). The soaking pit is highly computerized and can be used for scheduling, firing rate, heating time (lasting 8 to 18 hours) and rolling programs.
After heating, the conveyor carries the hot ingot to a two-high reversing mill, which passes, again and again, turning the roll and roll table over each time the ingot passes. Since each pass reduces the bloom by only about 50mm, 21 passes may be required, including several edges pass, and the bloom stands upright on its edge to obtain a slab bloom billet of 150mm*150mm.
Huaro Steel is a professional tinplate steel sheets suppliers,.The main products HUARO provides are hot rolled steel, cold rolled product, tin-plated product, galvanized product, pre-painted product which are directly exported to Middle East, Europe and Southeast Asia.
在线联系供应商
Other supplier products
 |
Graphite Electrode | Definition of Huaro Graphite Electrode Graphite electrode is high temperature resistant graphite conductive material. It is made of petroleum coke ... |
 |
Steel Billet | General Introduction of Steel Billet Prime steel billetsare the second stage product in steel production. They belong to hot rolling and directly m... |
 |
Cold Rolled Steel Sheet | Description ofCold Rolled Sheet Thecold rolled carbon steel sheetis manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemic... |
 |
Steel Billet | General Introduction of Steel Billet Prime steel billetsare the second stage product in steel production. They belong to hot rolling and directly ... |
 |
Steel Product | Steel Products List Steel is one of the oldest metals forged by humans and is still the most reliable and widely used material in manufacturing ... |
Same products
 |
Steel Press Fittings Coupling | 卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD | Features: Product Variety: Coupling (DDS Coupling ),Long coupling ,Reducer Coupling Size：DN20-D... |
 |
SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing... |
 |
Special Clearance 1.9" N80 NUE Tubing Coupling | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T... |
 |
DS55/HT55/HST55 4145h Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
 |
X-over 3-7/8"CAS 2Cr13 Crossover | 卖方: Tianjin Wenxin Energy Technology Co.,LTD | Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei... |
