Cold Rolled 304 Stainless Steel Sheets
&Manufacturers
Introduction of
Hot rolling is carried out over the recrystallization temperature, in simple terms, a billet is heated to certain temperature then push into the rolling machine, after several times of rolling to the required thickness and dimension, cut the edge, adjust the dimension then become a plate, this is called hot rollingstainless steel sheet. It can significantly reduce the energy consumption and cost. During the hot rolling, the stainless steel plate has high formability and low deformation resistance which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the processing properties of metal and alloy. The coarse grains in the casting state are broken, the cracks are healed, the casting defects are reduced or eliminated, and the cast microstructure is transformed into deformable structure to improve the processing property of the alloy.
Parameter
Thickness: 0.3mm-6mm.
Width: 1219mm, 1500mm, 1800mm.
Length: 2438mm, 3000mm.
Finish: 2B, HL, NO.4, 8K.
Package: Fumigation free wooden pallets with craft paper and steel strip.
The various series of304l stainless steel sheetproduced byDetect Metalscompany has the characteristics of high accuracy, high strength, high flatness, and excellent surface finish. Special requirements. It has a smooth surface, high plasticity, toughness, and mechanical strength. It has good corrosion resistance to ordinary alkali solutions and organic acids and inorganic acids. It Can resist corrosion in air or chemically corrosive media. It is an alloy steel that does not rust easily, but it is not absolutely rust-free. The the corrosion resistance of stainless steel mainly depends on its alloy composition (chromium, nickel, titanium, silicon, aluminum, etc.) and it's internal structure and the main role is the chromium element. Chromium has a high chemical stability, can form a passivation film on the surface of the steel, isolate the metal from the outside world, protect the steel plate from oxidation, and increase the corrosion resistance of the steel plate.
304l stainless steelsheet is a universal and very popular stainless steel material on the market. It has very good stainless high-temperature resistance and good resistance to intergranular corrosion.
What is the Austenitic Stainless Steel Sheet?
has an austenite structure at bot high temperature and room temperature, and there is no organizational transformation. Therefore, austenitic stainless steel sheet are also stainless steel that can not be strengthened by heat treatment. However, since austenitic stainless steel is easily hardened by cold work, therefore, austenitic stainless steel may improve its strength through cold hardening(cold deformation). The strength of this type of steel is relatively low in solution condition which was once a major weakness of austenitic stainless steel sheet.
General characteristics of
Classification of 304l stainless steel sheet:
- (hot-dip galvanized sheet, galvanized sheet), tin-plated sheet, composite steel sheet, color coated steel sheet
304l stainless steel sheetalso can be roughly classified according to its chemical composition, and metallographic structure.
company website:
Stainless steel and its Origin
Definition of stainless steel
High-Alloy steel that resists corrosion in air or chemically corrosive media. Stainless steel is aesthetically pleasing to the surface and has good corrosion resistance. It does not require surface treatment such as plating, and it exerts the inherent surface properties of stainless steel. A type of steel usually called stainless steel. Representative performance of 13 chrome steel, 18-chrome nickel steel, and other high alloy steel.
From the metallographic point of view, since the stainless steel contains chromium and forms a thin chromium film on the surface, this film separates and invades oxygen from the steel and acts as corrosion resistance.
history
The Chinese ethnic group is the earliest country in the world to iron-smelt steel. Our ancestors mastered some of the techniques of smelting iron, steelmaking, casting and forging, and heat treatment for more than 1,700 years before the European countries as far as 3,000 years ago. Human progress has made important contributions.
Steel has become the most basic and important material for modern industrial and agricultural production, transportation, national defense, and even people's lives. At present, although various new types of inorganic materials and organic synthetic materials have been greatly developed. However, in terms of production costs, wide applicability, etc., they are far from being able to replace steel. Therefore, the production capacity of steel is still one of the important signs to measure the national strength of a country. The reason why iron and steel materials are so widely used is because of the concentration of iron ore deposits, large storage capacity, relatively economical exploitation and smelting, and strong cold and heat deformability of semi-finished steel products. The finished product has excellent mechanical properties (strength, plasticity and impact resistance) and processability (cutting, welding, cold deformation, etc). However, compared with silicic acid materials, macromolecular synthetic materials, and certain non-ferrous metals, its biggest drawbacks are: under atmospheric or acid, alkali, salt, and other media conditions, it is easy to lose weight due to corrosion, or even complete destruction.
Development of stainless steel
The organizations that were born in 1910-1914 were martensite, ferritic, and austenitic stainless steels. In terms of chemical composition, they were mainly Fe-Cr and Fe-Cr-Ni systems. From the end of the First World War to the end of the Second World War, nearly three decades (ie 1919-1945). With the development of various industries, stainless steel has undergone differentiation in order to adapt to working conditions. That is, based on the three organizational states of the two major systems, many were derived by increasing or decreasing the carbon content and adding various other alloying elements. New type of stainless steel. In the 30 years from the end of the second major station to the present, anti-corrosion stainless steels have been developed mainly for anti-seawater or salt rotten candles, absorbing Y-rays and neutrons, obtaining ultra-high strength, and saving a nickel. , stainless steel for the nuclear industry, precipitation-hardening stainless steel, and nickel-nickel-nickel stainless steel.
In recent years, ultra-low carbon stainless steels and ultra-pure ferritic stainless steels have been developed to solve the intergranular corrosion and stress corrosion problems of austenitic stainless steels. At present, there are more than 230 types of stainless steel that have been put on the market, and nearly 50 are frequently used, of which about 80% are derivatives of austenitic stainless steel (18-chromium--8-nickel), while the remaining 20%are It was developed from 13 chrome steel. The most important research and development on stainless steel grades are focused on two aspects:
The first aspect is to improve the corrosion resistance of steel. Among them, the research on the intergranular rot of 18-8 steel has not only developed the steel type but also proposed a method for solving this problem. It also promoted research on the passivation and corrosion mechanism of stainless steel.
The second area is the development of high-strength stainless steels (ie precipitation hardened stainless steels) that developed with the advancement of aviation, aerospace and rocket technology after the Second World War. Among them, semi-austenitic precipitation-hardening stainless steels have excellent process performance (17-7PH type), can be processed easily after solution treatment, and the subsequent strengthening heat treatment (aging treatment) temperature is not high deformation is very small, in the United States this steel Mostly used in aeronautical structures, and it has been mass-produced. Countries have similar types of steel put into use.
Our service:
We are a china professional supplier and manufacturer of cold rolled 304 stainless steel sheets, plates, and coils with thickness from 0.3mm to 6.0mm. The surface finish we could offer is 2B, HL(hairline), NO.4(satin), 8K mirror and various colors plating. The standard width of the cold rolled 304 stainless steel sheet is 1219mmx2438mm( 4 feet* 8 feet), 1500mmx3000mm. This is our standard size in stock, we could use our slitting machine to slit the width to your requirement and cutting machine to cut the length to your special requirement.
If you are interested in ourStainless Steel Sheet, please order us now! You can alsocontact usby , or call me.
在线联系供应商
Other supplier products
 |
321 Stainless Steel Pipe | What are the introduction and uses of 321 stainless steel pipes? Stainless steel pipeis a kind of hollow long round steel, mainly used in petroleu... |
 |
Stainless Steel Pipe | Detect Metals has a 15 years experience in manufacturing round seamless stainless steel pipe, sqaure , round welded stainless steel pipe, square ... |
 |
1.4401/1.4404 Stainless Steel Sheet & Plate，1.4401 stainless steel plate,1.4404 stainless steel plate | from China with good price. Stainless steel types 1.4401 and 1.4404 are also known as grades 316 and 316L respectively. Grade 316 is an austenitic... |
 |
Cold Rolled 304 Stainless Steel Sheets,304 2b staninless steel sheet,304 mirror stainless steel plate | Cold Rolled 304 Stainless Steel Sheets,304 2b staninless steel sheet,304 mirror stainless steel plate 304 2b staninless steel sheet 304 mirror st... |
 |
310S Stainless Steel Plate,310s stainless steel sheet,stainless steel 310s plate,stainless steel plate 310 | 310S Stainless Steel Plate,310s stainless steel sheet,stainless steel 310s plate,stainless steel plate 310 310s stainless steel sheet stainless ste... |
Same products
 |
321 Stainless Steel Sheet | 卖方: Normandy Metal Industry Co., Ltd. | Normandy Metal, your go-to supplier for 321 stainless steel sheet. Our 321 stainless steel platea... |
 |
ppgi | 卖方: JOSCO | |
 |
NM400耐磨钢板 | 卖方: 山东海汇钢业有限公司 | NM400是一种中国耐磨钢板，在中东和非洲受到广泛欢迎。对NM400耐磨钢进行热轧，然后分别采用直接调质和再热调质技术对其进行热处理。冲击试验是用装有仪器的冲击试验机进行的。采用光学显微镜、透射... |
 |
Custom Bending Electronic Enclosure | 卖方: Shenzhen HSJ Metal Fabrication Co.，Ltd. | Custom Bending Electronic Enclosure Material: SPCC, SECCSGCCStainless Steel,copper, aluminum,... |
 |
Cold Rolled Steel Sheet | 卖方: huaro-shanghai | Description ofCold Rolled Sheet Thecold rolled carbon steel sheetis manufactured from the hot ro... |
