Ricoh B120HS intermec label printer ribbon
PT3206( Ricoh B120HS )is a Special resin ribbon widely used for food packaging materials print like PP,Website:, PE and film. High image density and Scratch resistance makes it be used in high speed printer.PERFORMANCE PROPERTIES•Excellent when printing on general wrapping polypropylene•Superior resistance to oils and water and preservability in •Hcold storage environments•High sensitivity which can be used for high-speed printers •Excellent image qualityTYPICAL APPLICATION•Suitable for PE, PP which are main packaging materials for food.•Clear image is possible even on transparent packages because printed image blocks light. •No spoiling of image during transportation and handling of food.RECOMMENDED LABEL STOCK•Synthetic film•Polyethylene, polypropyleneRIBBON SPECIFICATION•Resin ribbon, used for flat head printer•Base Material: Polyester film •Base Thickness: 4.5 ± 0.4µ•Ink Transparency: Min. 1.2 IMAGE PROPERTY•Image Density: Min. 1.5 •Thermo Sensitivity: Min. 0.38mj/dot •Image Resolution: Readable without ink smearing•Scratch resistance (times): Min. 25•Oil resistance: Min. ANSI 2.0 C•Water resistance: Min. ANSI 2.0 C•SPreservability in cold storage : Min. ANSI 2.0 CSTORAGE CONDITIONS•0°C TO 35°C •Humidity: 30 to 85 % RH
Other supplier products
|
|
|
ModelR2211PannelkPrints600 imagesAvailable forTattoo1,Website: the right card printer ribbon is important to the quality of your printed cards. But... |
|
|
|
Model800015-185PannelGRAY SCRATCH OFFPrints840 IMAGESAvailable forP300.P300F.P310F.P310I.P330I.P330M.P400.P420C.P420I.P430I.P500.P520C.P520I.P600.P... |
|
|
|
ModelR2212PannelBluePrints600 imagesAvailable forTattoo printers onlyChoosing the right card printer ribbon is important to the quality of your pri... |
|
|
|
Model800015-102PannelREDPrints1000IMAGESAvailable forP300.P300C.P310F.P310.P400.P420C.P500.P520C.P600.Choosing the right card printer ribbon is imp... |
|
|
|
PT3272( Dynic HL35 ) is a resin ribbon for fabric printing and widely used on Avery Dension Snap 500,Website:, Paxar 500, Citizen, SATO, ARGOX, God... |
供应产品
Same products
|
|
再结晶碳化硅喷火嘴 |
卖方: 唐山星斗碳化硅陶瓷有限公司 |
重结晶碳化硅烧嘴套特点：
1700℃使用温度；
抗氧化能力强寿命长；
提高燃烧效率，节能环保；
支持订制任意形状，方便安装维修； |
|
|
重结晶碳化硅精磨板 |
卖方: 唐山星斗碳化硅陶瓷有限公司 |
唐山星斗碳化硅出品的的碳化硅重结晶板精磨后具有更光滑平整的表面，更高的纯度，广泛用于ITO靶材、电子陶瓷的窑炉中。
精磨后的重结晶碳化硅棚板具备如下特点：
超薄厚度，可做1mm
光滑平整的... |
|
|
重结晶碳化硅板(棚板 / 承烧板) |
卖方: 唐山星斗碳化硅陶瓷有限公司 |
重结晶碳化硅板，也称重结晶碳化硅棚板，再结晶碳化硅板，碳化硅承烧板，碳化硅窑炉底板，纯碳化硅陶瓷板，碳化硅隔焰板，等等。较其它材料，同等工况下厚度可以更薄，使用温度可达1700℃，高温高承载力和... |
|
|
重结晶碳化硅管 |
卖方: 唐山星斗碳化硅陶瓷有限公司 |
重结晶碳化硅管，也称再结晶碳化硅管，作为高温窑炉的核心窑具，热电偶保护管，炉管，星斗公司出品的高温碳化硅管具备1650摄氏度下不变形，直线度好，圆度好，抗氧化能力强等优点。唐山星斗碳化硅陶瓷有限... |
|
|
氮化硅结合碳化硅梁/横梁/立柱 |
卖方: 唐山星斗碳化硅陶瓷有限公司 |
星斗公司出品的氮化硅结合碳化硅方梁，作为各种陶瓷窑炉的承载结构架，安全使用温度可达1450C，采用可靠的注浆成型工艺，经两次烧成，密度更均匀更大，完美的抗氧化、抗折强度，厚度更薄，重量更轻，导热... |
