.

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

steel shot 1mm


1.Steel shot picture

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand


Steel Shot is manufactured by melting selected scrap in electric induction furnace.

The chemical composition of molten metal is analyzed and strictly controlled by spectrometer to obtain SAE Standard specification.

The molten metal is atomized and transformed into round particle and subsequently quenched and tempered in a heat treating process to obtain a product of uniform hardness and microstructure, screened by size according to SAE Standard specification.



2. SteelShotSpecification

Project National Standards Quality
Chemical composition% C 0.85-1.20 0.85-1.0
Cr 0.26% 0.26%
Si 0.40-1.20 0.70-1.0
Mn 0.60-1.20 0.75-1.0
S <0.05 <0.030
P <0.05 <0.030
Hardness steel shot HRC40-50
HRC55-62
HRC44-48
HRC58-62
Density steel shot ≥7.20 g/cm3 7.4g/cm3
Microstructure Tempered Martensite or Troostite Tempered Martensite Bainite Composite organization



3. SteelShotProductionProcedure

1 Smelting(steelscrap+alloy)

2Forming

3Drying

4Screening(separatetheSAEshotsizefromtheoversizedshotparticlesusedforgritproduction)

5Selection(removeirregularshapedshot)

6Quenching(producesuperiorparticleintegritywithminimalstresscracks)

7Tempering

8Screening

9Packaging(25KGSperonesmallppbag)
Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand



4. SteelShotApplications

shot blasting

Fettling

cleaning the casting sand and burnt -on sand of the casting to make the surface get good cleanliness and required roughness, so that can be benefit to the subsequent processing and coating.

Steel plate surface preparation

Cleaning the oxide skin, rust and other impurity by shot Blasting, then using the vacuum cleaner or the purified compressed to clean up the steel products surface.

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

5. SteelShotCertificate

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

6. SteelShotNormalPacking

1). 25kg (55lb) per bag,then 40 bags put in a 1000kg (2200lb) bulk bag.

2). 25kg (55lb) per bag,then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.

3). 1000kg (2200lb) loose in one ton bulk bag.


Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

7. FAQ

Q:Whatpaymenttermsdoyousupport?

T/T:50%advancepayment,thenpleasepayustherest50%paymentwhengetthescannedB/LviaE-mail

L/C:100%irrevocableL/Catsight.

Q:What'stheMOQ.ofyourproducts?

OurMOQ.5ton.Orasyourrequirements,wecalculatethenewpriceforyou.

Q:Canyouprovidefreesamples?

Yes,wecansendfreesampleslessthan500gtoyou.

Q:Whatstandardsareyoucarryingoutforyourproducts?

SAEstandard,ISO9001,SGS

Q:Canyoupackthecargoasourrequirements?

Yes,wecanpacktheproductsasrequest.


8. Main products

We are the manufacturerof abrasive mediafor more than 13 years experience in China.

Abrasives media we manufacture:

Steel grit

Steel shot

Glass beads

Garnet

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand




9.Team and customers

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel SandWear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand

Ifyou need more details, pleasecontact withus any time

Wear Resistance Abrasive steel shot 1mm /Steel Grit/Steel Sand


在线联系供应商

至: Honest Horse China Holding Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Manufacturer for Qatar garnet sand blasting 30/60 with KOC approval
Manufacturer for Qatar garnet sand blasting 30/60 with KOC approval garnet sand blasting 30/60 1.Garnet Sand Picture: 2. Product Description Garnet Sand of Honest Horse Brand Honest HorsegarnetisROCKgarnetmine...
low consumption abrasive garnet sand water jet cutting abrasive garnet sand
low consumption abrasive garnet sand water jet cutting abrasive garnet sand steel shot SteelShot Pictures SteelShot Specification Items Steel Shot ChemicalComposition C 0.85-1.0 ...
Almandite/Red Color garnet sand 80 mesh/Abrasive for Waterjet Cutting Steel
Almandite/Red Color garnet sand 80 mesh/Abrasive for Waterjet Cutting Steel garnet sand 80 mesh 1.Garnet Sand Picture AlmanditegarnetOur rock garnet 80 mesh A+ is the highest quality in current China maket,sells well ...
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive steel shot SteelShot Pictures SteelShot Specification Items Steel Shot ChemicalComposition C 0.85-1.0 ...
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive
Sand Blasting Grit steel grit gl25 GH25 factory price sand blasting abrasive steel grit gl25 cast steel grit Picture Cast steel grit Steel Grit/Steel Shot is commonly used in airless applications since it is ...
供应产品

Same products

Rotary Magnetic Hooks
Rotary Magnetic Hooks 卖方: NingBo BeiLun Meank Magnetics Co., Ltd Model L D D1 D2 D3 H h Weight (g) Magnetic ...
ROYAL COLOR-SZ Quartz Countertops
ROYAL COLOR-SZ Quartz Countertops 卖方: XINYUN STONE (YUNFU) CO., LTD Upgrade your kitchen or bathroom with the luxurious and durable Royal Quartz Countertopsfrom Xiny...
High Purity Silica Sand
High Purity Silica Sand 卖方: Hebei Chida Manufacture and Trade Co., Ltd High Purity Silica Sand Product Description Applying specific quartz mine, High Purity Silica S...
Mica Powder
Mica Powder 卖方: Hebei Chida Manufacture and Trade Co., Ltd Mica Powder Product Description Mica is a layered silicate with good elasticity, toughness, ins...
再结晶碳化硅喷火嘴
再结晶碳化硅喷火嘴 卖方: 唐山星斗碳化硅陶瓷有限公司 重结晶碳化硅烧嘴套特点: 1700℃使用温度; 抗氧化能力强寿命长; 提高燃烧效率,节能环保; 支持订制任意形状,方便安装维修;