石墨块
Detailed Product Description
graphite block
1.Type:G1.G2.G3.G4
2.bulk density:1.72g/cc
3.maximum grain size:0.8mm
ISO9001:2008
graphite block
Vibration-molded or extruded, carbonized and graphitized under precise technical control.
High thermal and chemical resistance
Applications
1. Molds: hot pressing molds, static casting molds, centrifugal casting molds, pressure casting molds, fused refractory molds, etc.
2. Furnace parts: resistance heating elements, induction susceptors, structural elements and charging plates, furnace linings, heat shields and covers for pulling monocrystalline silicon or optical fibers, etc.
3. Anodes for the electrolysis of metals.
4. Cathodes in aluminum electrolysis cells.
5. Parts for heat exchangers.
6. Crucibles for melting and reduction.
7. Boats and trays for sintering.
Programmable properties
1. High thermal and chemical resistance
2. Good thermal conductivity
3. Low coefficient of thermal expansion
4. Minimal wettability to molten metals
Typical sizes
Diameter (mm) 630-1420
length (mm) 400-800
330x150x2200, 350x175x2100, 400x400x1800, 500x200x1800, 500x200x2500,
500x500x1800, 550x250x1800, 550x250x2500, 600x200x1800, 650x400x1800,
850x400x1800mm
other dimensions are available on request.
在线联系供应商
Other supplier products
|
|
石墨块 | Detailed Product Description graphite block 1.Type:G1.G2.G3.G4 2.bulk density:1.72g/cc 3.maximum grain size:0.8mm ISO9001:2008 graphite... |
 |
石墨电极 | Detailed Product Description 1.Grades:HP (ISO9001:2008standard) 2.Diameter:40-600mm or1.6"-24" 3.Length:250-2400mm or10"-96&q... |
 |
石墨棒 | Detailed Product Description carbon graphite rod(ISO9001:2008) 1.Raw material: high quality petroleum coke 2.Dia:35-300mm 3.Length:550-220... |
 |
石墨电极 | Detailed Product Description 1.Diameter:40 - 600mm or1.6"-24" 2.Length: 250 - 2400mm or10"-96" 3.Grades:RP, RPI (ISO9001... |
 |
光谱石墨棒 | Applications Electrodes and/or crucibles for spectrographic analysis of elements in mineral metals and solutions. Programmable properties High... |
Same products
 |
再结晶碳化硅喷火嘴 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅烧嘴套特点： 1700℃使用温度； 抗氧化能力强寿命长； 提高燃烧效率，节能环保； 支持订制任意形状，方便安装维修； |
 |
重结晶碳化硅精磨板 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 唐山星斗碳化硅出品的的碳化硅重结晶板精磨后具有更光滑平整的表面，更高的纯度，广泛用于ITO靶材、电子陶瓷的窑炉中。 精磨后的重结晶碳化硅棚板具备如下特点： 超薄厚度，可做1mm 光滑平整的... |
 |
重结晶碳化硅板(棚板 / 承烧板) | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅板，也称重结晶碳化硅棚板，再结晶碳化硅板，碳化硅承烧板，碳化硅窑炉底板，纯碳化硅陶瓷板，碳化硅隔焰板，等等。较其它材料，同等工况下厚度可以更薄，使用温度可达1700℃，高温高承载力和... |
 |
重结晶碳化硅管 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅管，也称再结晶碳化硅管，作为高温窑炉的核心窑具，热电偶保护管，炉管，星斗公司出品的高温碳化硅管具备1650摄氏度下不变形，直线度好，圆度好，抗氧化能力强等优点。唐山星斗碳化硅陶瓷有限... |
 |
氮化硅结合碳化硅梁/横梁/立柱 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 星斗公司出品的氮化硅结合碳化硅方梁，作为各种陶瓷窑炉的承载结构架，安全使用温度可达1450C，采用可靠的注浆成型工艺，经两次烧成，密度更均匀更大，完美的抗氧化、抗折强度，厚度更薄，重量更轻，导热... |
