Carbon fiber felt/ carbon mat
Carbon fiber felt/ carbon mat
Carbon fiber felt is dealing with special process under high temperature. It is light weight, corrosion resisting, high purity, high temperature resisting.
Technical:
Surface felt is used for CFRP surface, cloth hole, electric conduction, heat preservation.
|
Name |
density |
size |
thickness |
Usage |
|
Surface felt |
10g/m2 |
100m/roll |
CFRP, Electric conduction |
|
|
Surface felt |
20g/m2 |
100m/roll |
||
|
Surface felt |
30g/m2 |
100m/roll |
||
|
Insulation felt |
3mm, 300m |
3,5,6,8, 10mm |
Insulation, electric conduction |
Active carbon felt is used for absorption, environment protection.
|
Name |
density |
size |
thickness |
usage |
|
Active carbon felt |
80g/m2 |
Width 1-1.4m, 20kg/roll, absorption area 1300-1500m2/g |
1mm |
Organic solvent recovery, air purification, sewage treatment, health care, protection suit, electrical, energy field, corrosion resisting and thermostability etc. |
|
130g/m2 |
1mm |
|||
|
160g/m2 |
2mm |
|||
|
190g/m2 |
3mm |
|||
|
240g/m2 |
3mm |
|||
|
250g/m2 |
4mm |
|||
|
280g/m2 |
4mm |
|||
|
300g/m2 |
5mm |
|||
|
350g/m2 |
5mm |
|||
|
350g/m2 |
＞1600m2/g |
|||
|
＞1800m2/g |
||||
|
＞2000m2/g |
在线联系供应商
Other supplier products
 |
Fiberglass backing pads | Fiberglass backing pads It is adopted of multi-Layer stack of compression molding in the mold after curing by heating. It is the base material of ... |
 |
Fiberglass 3D fabric | Fiberglass 3D fabric 3D fabric is woven out of 100% E-glass fiber, as well as carbon fiber, aramid fiber and other high performance fibers. Its str... |
|
|
Carbon fiber felt/ carbon mat | Carbon fiber felt/ carbon mat Carbon fiber felt is dealing with special process under high temperature. It is light weight, corrosion resisting, hi... |
 |
E-Glass Chopped Strand Mat | E-Glass Chopped Strand Mat E-Glass Chopped Strand Mat is made of randomly distributed chopped strands held tighter by a emulsion/ powder binder. It... |
 |
E-glass fiber fabric | E-glass fiber fabric E-glass fiber fabric is made by twisted yarn. It is high strength, suitable for boat, automobile parts, furniture, tank, cooli... |
Same products
 |
再结晶碳化硅喷火嘴 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅烧嘴套特点： 1700℃使用温度； 抗氧化能力强寿命长； 提高燃烧效率，节能环保； 支持订制任意形状，方便安装维修； |
 |
重结晶碳化硅精磨板 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 唐山星斗碳化硅出品的的碳化硅重结晶板精磨后具有更光滑平整的表面，更高的纯度，广泛用于ITO靶材、电子陶瓷的窑炉中。 精磨后的重结晶碳化硅棚板具备如下特点： 超薄厚度，可做1mm 光滑平整的... |
 |
重结晶碳化硅板(棚板 / 承烧板) | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅板，也称重结晶碳化硅棚板，再结晶碳化硅板，碳化硅承烧板，碳化硅窑炉底板，纯碳化硅陶瓷板，碳化硅隔焰板，等等。较其它材料，同等工况下厚度可以更薄，使用温度可达1700℃，高温高承载力和... |
 |
重结晶碳化硅管 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 重结晶碳化硅管，也称再结晶碳化硅管，作为高温窑炉的核心窑具，热电偶保护管，炉管，星斗公司出品的高温碳化硅管具备1650摄氏度下不变形，直线度好，圆度好，抗氧化能力强等优点。唐山星斗碳化硅陶瓷有限... |
 |
氮化硅结合碳化硅梁/横梁/立柱 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 星斗公司出品的氮化硅结合碳化硅方梁，作为各种陶瓷窑炉的承载结构架，安全使用温度可达1450C，采用可靠的注浆成型工艺，经两次烧成，密度更均匀更大，完美的抗氧化、抗折强度，厚度更薄，重量更轻，导热... |
