F-1600三缸泥浆泵橡胶活塞胶皮HNA offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are: • Pistons with replacement rubbers Our premium pistons are fully i
HNA offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are:
- Pistons with replacement rubbers
Our premium pistons are fully interchangeable with other API standard designed pistons and deliver maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make our premium piston a sound value.
- Bonded Rubber Pistons
This one piece bonded constructed piston has no joints to leak. Eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes. This Fail-Safe piston seals off to greater diameter as liner wears
- Premium Bonded Urethane Pistons
Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service for years, providing unmatched performance under extreme drilling conditions. This one piece bonded unit provides the same series of advantages., being imprevious to oil and other chemicals
HNA also offers a full line of piston replacements including Piston Hubs, Plates, Snap rings and Replacement Rubbers.
The hub is formed from high grade steel.
The piston rubber is made from specially formulated compounds which are resistant to the effects of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals.
TONY
sales3(at)pumpparts.cn
在线联系供应商
Other supplier products
 |
National 8-P-80 三缸泥浆泵双金属缸套 | HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner... |
 |
泥浆泵阀体阀座 | HNA offers 5 different styles of valves & seats to fit your drilling needs, suiting to almost all popular mud pumps in the world. The Stem Guided ... |
 |
Well service EWS-446 triplex mud pump | 一、 HW446 Mud Pump TECHNICAL SPECIFICATION Rated input power 328KW (440HP) Rated Stroke 320 Stroke/Minute(320SPM) Stroke 152.4mm （6"） Gear Ratio ... |
 |
泥浆泵 | 1. The fluid end assembly mainly consists of fluid end, valve assembly, liners and pistons. Fluid end is made of forged alloy steel and three flui... |
 |
泥浆泵动力端十字头销 | Power End Parts HNA supplies power end parts such as Crank shaft, Pinion shaft, Crosshead, Bull Gear, Pulsation Dampener, Frame and so on for foll... |
Same products
 |
中国供应商 饮料厂用全自动玻璃瓶果汁液体灌装机 | 卖方: 河北盛辉泵业 | 饮料液体灌装机具有集水处理、清洗、灌装、贴标和封盖于一体的自动化机身，是精确、快速灌装稀薄至中等粘度液体的理想选择。它拥有完善的温度控制系统、自动清洗系统、精确的温度控制系统和逆流系统。 |
 |
中国供应商出厂价 500 毫升矿泉水瓶液体灌装机 | 卖方: 河北盛辉泵业 | 该机采用先进的生产工艺，结构科学合理，操作简便。广泛应用于矿泉水、茶、果汁等饮料的塑料瓶和玻璃瓶灌装。也是饮料生产厂和矿泉水生产线的理想选择。同时，它还可与旋盖机、贴标机配套组成流水线。 |
 |
受欢迎的卧式半自动高粘度液体酱料灌装机 | 卖方: 河北盛辉泵业 | 半自动膏体灌装机适用于各种粘性、非粘性、腐蚀性液体及其它小包装的定量灌装。该机由卧式半自动灌装机和小型输送带组成，有利于瓶装灌装液体的有效输送，节省人力。它具有结构合理、操作方便、智能控制等优点。 |
 |
高性能立式自动小袋棒状粉末液体包装机 | 卖方: 河北盛辉泵业 | 粉末液体灌装机装机适用于各类流动性差的酱体包装，配备三边封或四边封制袋成型及精确定位封切系统，可通过活塞行程方式调节，达到精确控制流量，自动计量和自动灌装的目的。适用于粘稠体、悬浮液和乳化油等流... |
 |
新产品全自动无菌BIB盒中袋液体灌装包装机 | 卖方: 河北盛辉泵业 | 无菌袋灌装机是专门针对盒中袋定量灌装作业而设计的，采用流量计自动控制每次出料量，灌装精度高，灌装量设定、调节动作直观、简便。该设备设计新颖，结构合理紧凑，能自动完成开盖、定量灌装、抽真空、封盖等... |
