GD-0615 Wax Content Tester
Summary
This instrument is designed and made as per standardsT 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway EngineeringandSH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by cracking distillation.
I. Main technical features
1. This instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part is the cooling filter.
2. The special designed air flow distributor and hook for sample vessel make the instrument more reasonable and convenient for use.
3. The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the observation window. Convenient to observe.
4. This instrument equips a high accuracy digital temperature controller with clear temperature show and simple temperature set.
5. This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.
II. Main technical specifications
1. Power supply： AC（220±10%）V，50Hz
2. Heating power： 700W
3. Cooling power： 1000W
4. Stirring rate of motor： 1200 r/min
5. Temperature sensor： Pt100
6. Refrigeration medium： F22
7. Temperature accuracy： ±0.1℃
8. Working environment： -30℃～40℃，RH＜85
9. Maximum power consumption： 1800W
10.Overall dimension： 620mm×500mm×1600mm (The air flow distributor is included)
III. Optional accessories
1. Vacuum pump： Model 2XZ-2L/S（Recommend）
2. Vacuum drying oven： Model DZF-6020（Recommend）
3. Burning furnace： Model SYD-0615-1 Cracking furnace（Recommend）
4. Balance： 0.1mg, 0.1g one set for each
在线联系供应商
Other supplier products
 |
GD-261-1 Pensky-Martens Closed Cup Flash Point Tester | I. Main technical features 1. Single chip microcomputer control technique.LCD screen displays.English man-machine interaction interface.The heating... |
 |
GDGS Power Transformers Dielectric Loss Analysis | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GDGS Tan Delta Automatic Dielectric Loss Tester | 1PowerFactor Testerapplication GDGS automatic tangent delta tester is applied to measure the dielectric loss and capacitor value of insulation mate... |
 |
GDE-1B Engler Viscometer | I. Main technical features 1. The instrument adopts desktop, all-in-one and double inner crucible structure. Both of inner and outer crucible adopt... |
 |
GD-265-3 Automatic Heavy Oil Capillary Viscometer Washer | Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ... |
Same products
 |
中国供应商 饮料厂用全自动玻璃瓶果汁液体灌装机 | 卖方: 河北盛辉泵业 | 饮料液体灌装机具有集水处理、清洗、灌装、贴标和封盖于一体的自动化机身，是精确、快速灌装稀薄至中等粘度液体的理想选择。它拥有完善的温度控制系统、自动清洗系统、精确的温度控制系统和逆流系统。 |
 |
中国供应商出厂价 500 毫升矿泉水瓶液体灌装机 | 卖方: 河北盛辉泵业 | 该机采用先进的生产工艺，结构科学合理，操作简便。广泛应用于矿泉水、茶、果汁等饮料的塑料瓶和玻璃瓶灌装。也是饮料生产厂和矿泉水生产线的理想选择。同时，它还可与旋盖机、贴标机配套组成流水线。 |
 |
受欢迎的卧式半自动高粘度液体酱料灌装机 | 卖方: 河北盛辉泵业 | 半自动膏体灌装机适用于各种粘性、非粘性、腐蚀性液体及其它小包装的定量灌装。该机由卧式半自动灌装机和小型输送带组成，有利于瓶装灌装液体的有效输送，节省人力。它具有结构合理、操作方便、智能控制等优点。 |
 |
高性能立式自动小袋棒状粉末液体包装机 | 卖方: 河北盛辉泵业 | 粉末液体灌装机装机适用于各类流动性差的酱体包装，配备三边封或四边封制袋成型及精确定位封切系统，可通过活塞行程方式调节，达到精确控制流量，自动计量和自动灌装的目的。适用于粘稠体、悬浮液和乳化油等流... |
 |
新产品全自动无菌BIB盒中袋液体灌装包装机 | 卖方: 河北盛辉泵业 | 无菌袋灌装机是专门针对盒中袋定量灌装作业而设计的，采用流量计自动控制每次出料量，灌装精度高，灌装量设定、调节动作直观、简便。该设备设计新颖，结构合理紧凑，能自动完成开盖、定量灌装、抽真空、封盖等... |
