Spiral Drill Collar With Elevator Groove And Slip Groove
Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API spec7-1. Hard banding is optional at customers requests.
Technicalspecificationsandparameters
DrillCollarrangesO.D.(mm) |
Elevatorgroovedepth(mm) |
Elevatorgroovelength(mm) |
Slipgroovedepth(mm) |
Slipgroovelength(mm) |
101.6~117.5 |
5.6 |
406 |
4.8 |
457 |
120.6~142.9 |
6.4 |
406 |
4.8 |
457 |
146.0~168.3 |
7.9 |
406 |
6.4 |
457 |
171.4~219.1 |
9.5 |
406 |
6.4 |
457 |
>=222.2 |
11.1 |
406 |
6.4 |
457 |
Size |
TubeOD |
TubeOD1 |
ToolJointOD |
Tool |
Connection |
Max |
Center |
Min |
Deu |
Dcu |
|||||||
31/2 |
31/2 |
21/4 |
43/4 |
21/4 |
NC38 |
37/8 |
4 |
2 |
21/16 |
21/16 |
113/16 |
||||||
4 |
4 |
21/2 |
51/4 |
21/2 |
NC40 |
43/16 |
41/2 |
21/4 |
29/16 |
29/16 |
25/16 |
||||||
41/2 |
41/2 |
211/16 |
61/4 |
211/16 |
NC46 |
411/16 |
5 |
27/16 |
23/4 |
23/4 |
21/2 |
||||||
213/16 |
213/16 |
29/16 |
||||||
5 |
5 |
3 |
65/8 |
3 |
NC50 |
51/8 |
51/2 |
23/4 |
51/2 |
51/2 |
31/4 |
7 |
31/4 |
51/2FH |
511/16 |
6 |
3 |
33/8 |
33/8 |
31/8 |
||||||
37/8 |
37/8 |
35/83/4 |
||||||
4 |
4 |
33/4 |
||||||
65/8 |
65/8 |
4 |
8 |
4 |
65/8FH |
615/16 |
71/8 |
33/4 |
41/2 |
41/2 |
41/4 |
||||||
5 |
5 |
43/4 |
||||||
1.MaximumtubeIDis1/8largerthannominal.MinimumtubeIDiscontrolledbythedriftrequirement. |
在线联系供应商
Other supplier products
Integral Spiral Heavy Weight Drill Pipe | Integral spiral heavy weight drill pipe is to extend the central upset of heavy weight drill pipe and to cut spiral groove on heavy weight drill pi... | |
Integral Short Drill Rod Type DZ | Integral Short Drill Rod Type DZ series are mainly used in oil field, making the connection with drilling string. Our plant manufacture various int... | |
Taper Tap | Thetapertapisaspecialfishingtoolmakingthreadintubedroppedobjectsuchasdrillpipeandoiltube.Thetapsareturnedfromhightrengthalloysteelforgingmaterialsa... | |
Junk Sub | products comply with API Spec.7. Junk Sub Type HoleSize Max.OD(in) SubOD(in) BoreDia.(in) Connection SLB127-3-00 ... | |
Back-off Sub | Back-off Sub Type OD(mm) ID(mm) Connection(API) ThreadforFishing(API) OAL(mm) ZDK105-1-00 105 20 NC31LH 27... |