Mechanical Load Tester
Product Description
1:Complies with IEC 61646, IEC 61215 mechanical load test specification
2:Air pressure is adjustable, output range is from 2400pa to 5400pa ±5%.
3:Maximum measurement range: 220 x 260 cm.
4:Apparatus structure material:aluminum-extruded.
5:Fixtures and holders can be customized design for requirement of testing module.
6:Manual operation is simple; manual maintenance is easy.
1:Complies with IEC 61646, IEC 61215 mechanical load test specification
2:Air pressure is adjustable, output range is from 2400pa to 5400pa ±5%.
3:Maximum measurement range: 220 x 260 cm.
4:Apparatus structure material:aluminum-extruded.
5:Fixtures and holders can be customized design for requirement of testing module.
6:Manual operation is simple; manual maintenance is easy.
Product Feature
* Each pneumatic cylinder with a vacuum sucker, pressure is adjustable, minimum pulling force is 2400pa
* Loading force is delivered to 12 vacuum suckers through crossbars and pillars
* Each vacuum sucker is equipped with a vacuum level indicator
* Each cylinder acts pulling force up to 45kg between sucker and glass
* The distance of sucker-to-sucker is adjustable within 120mm ~ 400mm
* The angle of sucker is adjustable within 15° between joint and arm
* The angle of pneumatic cylinder is rotatable within 15° between cylinder and crossbar
* Each pneumatic cylinder with a vacuum sucker, pressure is adjustable, minimum pulling force is 2400pa
* Loading force is delivered to 12 vacuum suckers through crossbars and pillars
* Each vacuum sucker is equipped with a vacuum level indicator
* Each cylinder acts pulling force up to 45kg between sucker and glass
* The distance of sucker-to-sucker is adjustable within 120mm ~ 400mm
* The angle of sucker is adjustable within 15° between joint and arm
* The angle of pneumatic cylinder is rotatable within 15° between cylinder and crossbar
Product Specification/Models
* Maximum pressure per set: >6bar
* Maximum output per set: >300kg
* Maximum stroke: 150mm
* Cylinder number: 12 cylinders in three sets
* Disc diameter: 120mm
* Calibrator: 350kg×4
* Outline dimension of rack: L60 × D60 × H140 cm
* Outline dimension of apparatus : L360 × D250 × H185 cm
* Weight : 1200kg
* Power demand: 1phrase AC100-220V/5A 50-60Hz
* Air source demand: 6-8kg/cm²
Product Description* Maximum pressure per set: >6bar
* Maximum output per set: >300kg
* Maximum stroke: 150mm
* Cylinder number: 12 cylinders in three sets
* Disc diameter: 120mm
* Calibrator: 350kg×4
* Outline dimension of rack: L60 × D60 × H140 cm
* Outline dimension of apparatus : L360 × D250 × H185 cm
* Weight : 1200kg
* Power demand: 1phrase AC100-220V/5A 50-60Hz
* Air source demand: 6-8kg/cm²
Hail impact tester can simulate the impact of hail falling on your products.Based on the results,and you can improve products with the best quality and reliability.
Product Feature
* Complies with IEC 61215, IEC 61646 Hail Test Specification
* Test application for Solar cell, LED module, LCD module, Outdoor panel
* Air-fired hails, digital display, pressure adjustment, wired remote control
* Laser positional instruction, X/Y axial manually adjustable
* Two high-speed laser detection module, launching speed is 15~40 m/sec ±5%
* The largest test size is 350 × 200cm, and it can be customized as request
* Velocity sensor is around 50cm from the surface of testing module
* Complies with IEC 61215, IEC 61646 Hail Test Specification
* Test application for Solar cell, LED module, LCD module, Outdoor panel
* Air-fired hails, digital display, pressure adjustment, wired remote control
* Laser positional instruction, X/Y axial manually adjustable
* Two high-speed laser detection module, launching speed is 15~40 m/sec ±5%
* The largest test size is 350 × 200cm, and it can be customized as request
* Velocity sensor is around 50cm from the surface of testing module
Product Specification/Models
* Hail diameter:25.0 mm ±2% (adjustable
* Hail weight:7.59g ±2%
* Hail mold:12 pc/ set
* Storage container:One set
* Launching speed:14m/sec ±5% (adjustable)
* Launcher dimension:L400 x D 270 x H 267 cm
* Launcher weight:850 kg
* Power demand:AC 100~230V/2A 50-60Hz
* Air demand:5 ~ 8 kg/cm2
* Hail diameter:25.0 mm ±2% (adjustable
* Hail weight:7.59g ±2%
* Hail mold:12 pc/ set
* Storage container:One set
* Launching speed:14m/sec ±5% (adjustable)
* Launcher dimension:L400 x D 270 x H 267 cm
* Launcher weight:850 kg
* Power demand:AC 100~230V/2A 50-60Hz
* Air demand:5 ~ 8 kg/cm2
Application
* solar panels or Photovoltaic component
* other related equipment being placed outdoors without shelter
* solar panels or Photovoltaic component
* other related equipment being placed outdoors without shelter
在线联系供应商
Other supplier products
Shock & bump tester | Product DescriptionThe shock and bump tester is used to simulate the repeatable shock environment subjected in the transportation and use process o... | |
Bump tester | Product DescriptionThe purpose of bump test is to know when the specimen encounters repetitive mechanical-hit environment, the accumulation of its ... | |
Portable device drop tester KD-208A | Equipped with portable device drop tester, we can avoid turning specimen around to reach the requirement of high standard testing to test mobile , ... | |
Hail impact tester | Product DescriptionHail impact tester can simulate the impact of hail falling on your products.Based on the results,and you can improve products wi... | |
Mechanical Load Tester | Product Description1:Complies with IEC 61646, IEC 61215 mechanical load test specification2:Air pressure is adjustable, output range is from 2400... |