.

DDH-65T 65tonsHIGH SPEED PRECISION POWER PRESS MACHINE/METAL LAMINATION STAMPING / PUNCHING MACHINE/MESH PUNCHING

Model DDH-65T
Capacity TON 65
Capacity occur point MM 2.0
Stoke MM 30
Stoke per minute S.P.M 150-700
Bloster area MM 950×650
Bed opening MM 700×125
Slide area MM 950×420
Die height adjustment MM 300-350
Die height adjustment motor KW 0.4
Feed line height MM 160±15
Main motor KW 19
Gross weight TON 12.5



在线联系供应商

至: HOWFIT SCIENCE AND TECHNOLOGY CO.,LTD.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

DDH-220T 220tons HIGH SPEED STAMPING LINE/MOTOR CORE STAMPING/MESH PUNCHING
DDH-220T 220tons HIGH SPEED STAMPING LINE/MOTOR CORE STAMPING/MESH PUNCHING Model DDH-220T Capacity TON 220 Capacity occur point MM 3.2 Stroke MM 30 Stroke per minute S.P.M 150-500 Bloster area MM 1800×950 Bed opening...
DDH-30T 30tons HIGH SPEED PRESS MACHINE/ CONNECTOR PUNCHING/TERMINAL PUNCHING
DDH-30T 30tons HIGH SPEED PRESS MACHINE/ CONNECTOR PUNCHING/TERMINAL PUNCHING Model DDH-30T Capacity TON 30 Stroke MM 20 25 30 40 Stroke per minute S.P.M 200-1000 200-900 200-800 200-600 Die height MM 195-235 192-232 190-230 ...
DDH-65T 65tonsHIGH SPEED PRECISION POWER PRESS MACHINE/METAL LAMINATION STAMPING / PUNCHING MACHINE/MESH PUNCHING
DDH-65T 65tonsHIGH SPEED PRECISION POWER PRESS MACHINE/METAL LAMINATION STAMPING / PUNCHING MACHINE/MESH PUNCHING Model DDH-65T Capacity TON 65 Capacity occur point MM 2.0 Stoke MM 30 Stoke per minute S.P.M 150-700 Bloster area MM 950×650 Bed opening MM 7...
HC-25T 25 tons HIGH SPEED PRECISION POWER PRESS MACHINE/METAL LAMINATION STAMPING / PUNCHING MACHINE
HC-25T 25 tons HIGH SPEED PRECISION POWER PRESS MACHINE/METAL LAMINATION STAMPING / PUNCHING MACHINE Model HC-25T Capacity TON 25 Stroke MM 15 20 25 30 35 Stroke per minute S.P.M 200-1000 200-900 200-800 200-800 200-700 Die height MM 188-218 185-21...
DDL-125T 125tons HIGH SPEED STAMPING LINE/MOTOR CORE STAMPING/MESH PUNCHING
DDL-125T 125tons HIGH SPEED STAMPING LINE/MOTOR CORE STAMPING/MESH PUNCHING Model DDL-125T Capacity TON 125 Capacity occur point MM 3.2 Stroke MM 30 Stroke per minute S.P.M 150-700 Bloster area MM 1300×850 Bed opening...
供应产品

Same products

Sand Blasting Room
Sand Blasting Room 卖方: Qingdao Bestech Machinery Co.,Ltd 1)门: 服务门采用焊接型材,有一个封闭钢板,内部涂有耐磨橡胶。 专用密封系统防止磨损材料的损失,使关闭门可能,没有努力。 可选地,可提供两扇门(隧道式房间)和一扇门给操作员。 当其中一扇门被...
Wet type Dustless Sand Blaster
Wet type Dustless Sand Blaster 卖方: Qingdao Bestech Machinery Co.,Ltd BT150 BT150可容纳19公斤水和2.7公斤磨料,允许长达30分钟的连续喷砂时间。 本机配有一台60 CFM的空气压缩机,运转良好。 本机是理想的企业与1-4小时爆破每周。 它是完全便...
Wire Mesh Belt Shot Blasting Machine for Wheel Hub
Wire Mesh Belt Shot Blasting Machine for Wheel Hub 卖方: Qingdao Bestech Machinery Co.,Ltd 网带式抛丸机主要用于薄壁铸件、薄壁铸铁、铝合金铸件、陶瓷等小型工件的表面处理和抛丸强化,具有连续性能好、清洗效率高、变形小、无坑等特点。 可单独使用,也可与其它抛丸机配套使用。
Steel Pipe External Wall Shot Blasting Machine
Steel Pipe External Wall Shot Blasting Machine 卖方: Qingdao Bestech Machinery Co.,Ltd 钢管外壁抛丸机适用于钢管、钢瓶的表面处理和强化,工件在输送辊道上自动旋转,自动行走,工件的运转速度可根据其表面质量的要求进行及时调整。 本设备由:主、辅清理室、抛丸器、工件辊道输送系统、纵向螺旋...
Filter Cartridge Dust Collector
Filter Cartridge Dust Collector 卖方: Qingdao Bestech Machinery Co.,Ltd 含尘气体进入除尘器灰斗后,由于气流断面突然扩大及气流分布板作用,气流中一部分粗大颗粒在动和惯性力作用下沉降在灰斗;粒度细、密度小的尘粒进入滤尘室后,通过布朗扩散和筛滤等组合效应,使粉尘沉积在滤料...