BMH Hydraulic Orbit Motors
Hydraulic Orbit Motor BMH:
*Advanced manufacturing devices for the Gerolor gear set, which use low pressure of start-up,provide smooth, reliable operation and high efficiency.
*Shaft seal can bear high pressure of back and the motor can be used in parallel or series.
*Special design in the driver-linker and prolong operating life.
*Special design for distribution system can meet the requirement of low noise of unit.
*Compact volume and easy installation
OMH hydraulic motor Main specifiction:
| Type |
BMH 200 |
BMH 250 |
BMH 315 |
BMH 400 |
BMH 500 |
|
|
Displacement (cc/rev) |
203.2 | 255.9 | 316.5 | 406.4 | 489.2 | |
|
Max torque (n.m) |
cont | 510 | 621 | 740 | 850 | 830 |
| int | 439 | 348 | 282 | 220 | 184 | |
|
Max pressure (mpa) |
cont | 17.5 | 17.5 | 17.5 | 15.5 | 12.5 |
| int | 20 | 20 | 20 | 19 | 16 | |
|
Max speed rate (rpm) |
cont | 366 | 290 | 236 | 183 | 155 |
| int | 439 | 348 | 282 | 220 | 184 | |
|
Max flow (L/min) |
cont | 75 | 75 | 75 | 75 | 75 |
| int | 90 | 90 | 90 | 90 | 90 | |
|
Weight(kg) |
10.5 | 11 | 11.5 | 12.3 | 13.0 | |
Substitute Reference substance
| MOTOR CROSS REFERENCE TABLE | ||||||||
| HANJIU HYDRAULIC |
M+S HYDRAULIC |
EATON CHAR LYNN |
DANFOSS | ROSS TRW |
WHITE CROSS |
PARKER | SAM BREVINI |
BOSCH RECROTH |
| BMM | MM MLHK | J SERIES | OMM | BGM | MGX | |||
| BMP/BM1 | MP HP | H SERIES | OMP DH | MF MG | WP RS | TC TE TB | BG | MGP GXP |
| BMR/BM2 | MR HR MLHRW,RW | S,T SERIES W SERIES | OMR DS OMEW | MB | WR RE | TF | BR | MGR GMR |
| BMH/BM4 | MH MLHH HW HWF | OMH | ME | RE | TG | |||
| BMS/BM5 | MS MSY MLHS | 2000 SERIES | OMS | ME | RE | TG | HPR | MGS GMS |
| BMT/BM6 | MT MLHT MTM | 6000 SERIES | OMT TMT | MJ | HT | MGT,GMT | ||
| BMV | MV MLHV | 10000 SERIES | OMV | MGV GMV | ||||
Hydraulic orbit motor applications:
Brush cutters
Mower
Haveresting equipment
Forestry equipment
Turf equipment
在线联系供应商
Other supplier products
 |
BMT Hydraulic Motor | Hydraulic orbit motor BMT BMT series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit c... |
 |
G5 GEAR PUMP | G5 series high pressure gear pumps include 2 types: with fore bearing and without fore bearing. The gear pump with fore bearing can bear certain ra... |
 |
BMS Hydraulic Motor | Hydraulic orbit motor BMS BMS series motor adapt the advanced Gerotor gear set design with disc distribution flow and high pressure. The unit c... |
 |
Bmp-50/Bmp-80/Bmp-160/Bmp-200/Bmp-400/Bmp-500 | Hydraulic Orbit Motor BMP BMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Ge... |
 |
Agricultural machinery parts Hydraulic gear pump | Hanjiu Gear Pump:Hydraulic oil gear pump CBN gear pump seriesCBN-E563Displacement: 4~125 ml/rVarious pumps of different parameter!v id="StyleTableP... |
Same products
 |
电梯钢丝绳铅基合金铅基巴氏合金耐磨锡基合金 | 卖方: 河南桦创金属材料贸易有限公司 | 电梯钢丝绳铅基合金铅基巴氏合金抗压锡基巴氏合金 铅是化学元素，其化学符号是Pb（拉丁语Plumbum），原子序数为82。铅是柔软、延展性强的弱金属，有毒，也是重金属。铅的本色为青白色，在空气中表... |
 |
各种型号机床巴氏合金轴瓦滑块 | 卖方: 河南桦创金属材料贸易有限公司 | 各种型号机床巴氏合金轴瓦滑块 巴氏合金轴瓦托瓦滑块，巴氏合金的工艺包括很多，但基本的就是底瓦的准备，1、底瓦表面镀锡打底，底瓦表面镀底锡是为了使巴氏合金与底瓦接合更牢固、紧密。因为巴氏合金中的锡... |
 |
巴氏合金推力瓦的作用和特点 | 卖方: 河南桦创金属材料贸易有限公司 | 巴氏合金推力瓦的结构怎样,有什么特点? 巴氏合金推力瓦的顶视为扇形,一般在60~120mm厚的钢质瓦坯表面加I出纵横鸽尾槽或方槽,然后浇铸钨金。 ACPM-2308-TR1用钨金作瓦面的优点是:... |
 |
Ethyl Butyrate CAS:105-54-4 | 卖方: 陕西弘康生物技术有限责任公司 | 丁酸乙酯用途 【用途一】广泛用于各种食品、饮料、酒类与烟草香精中 【用途二】用作色谱分析标准物质及溶剂，也用于香料工业【用途三】适用于特殊的玫瑰型香精和花香果香型香精基(化妆品用)，但用量宜... |
 |
WPC-CP-01 Eco-friendly Round Cotton Pads | 卖方: Winner Medical Co., Ltd | Using 100% high-quality spunlace nonwoven fabric, our WPC-CP-01 eco-friendly bulk cotton rounds c... |
