Fabric Heat Conduction Performance Tester
The instrument is mainly used for the determination of textiles, fire supplies and other materials thermal conductivity.
Standards
EN 367-1992 Protective clothing -Protection against heat and flames -Test Method: Determination of the heat transmission on exposure to flame
Features
The instrument can digitally display the flame temperature, measurement temperature, and time.
The burner is equipped with a flame nozzle which is suitable for burning petroleum liquefied gas. The stomata are distributed in the inner and outer rings. The calorimeter is placed in the hole of the splint on the sample rack and is in direct contact with the sample.
Its main performance indicators can achieve the level of similar foreign products, which fill the domestic blank. The cost of the instrument is only one-fifth of similar foreign products.
Methods
Place the sample on a heat source with a certain heat flux
The time required to measure the temperature rise by the calorimeter on the back of the sample (Δt = 24 ° C) as an index for evaluating the thermal conductivity
Technical Parameters
Items |
Parameters |
Heat source |
Oil liquefied gas |
Heat flux density |
Greater than 40KW / m2 |
Measuring temperature range |
20 ℃ ~ 200 ℃ |
Timing range |
0 ~ 100s |
Sample size |
140mm × 140mm |
Calorimeter diameter |
Φ40mm |
Power supply |
AC 220V 50Hz 1.5kW |
Other supplier products
|
electronic circular locus tester |
Circular Locus Tester is designed to test the pilling property of fabric and fiber pure yarn and blended yarn, knitted, woven fabric.Circular Locus... |
|
Gakushin Type jis electronic rubbing fastness tester |
Rubbing Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of ‘marring’ of th... |
|
Electronic Single Fiber Strength Tester |
Single Fiber Strength Tester, suiting to test the tension strength and elongation of chemical fiber, cotton, wool, ramie, silk, glass fiber, fine m... |
|
Low Temperature Chrysler Fold Tester |
Cold Fold Tester ---Chrysler
Standards:LP-463-KB-28-01 Method A
Applications:
This Cold Fold Tester is applied to the cold fold test based on Chrys... |
|
iec60529 glow wire equipment |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
供应产品
Same products