Architectural aluminium powder coating MT-D1036 Gloss/ Satin/ Matt
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-D1036 Gloss/ Satin/ Matt is a range of durable powder coatings specially formulated without of TGIC for use on architectural aluminium components. MT-D1036 Gloss/ Satin/ Matt typically meets the performance requirement of AAMA 2603 , AS 3715 and Qualicoat 1 specifications. MT-D1036 Gloss/ Satin/ Matt is designed to provide excellent exterior durability and colour retention and conforms to the requirements of all the major Asia architectural finishing standards.
All MT-D1036 powders are lead-free available in a wide range of color in full gloss such as high gloss, satin and matt finishes. It is designed to produce texture, pearlescent and other special effects can be custom matched to the users'requirements.
Powder Properties
| Chemical Type | Polyester |
| Gloss level (60°) | Depend on the colour |
| Specific Gravity | 1.2-1.75 g/cm³ depending on colour and effect |
| Particle Size | Suitable for electrostatic spray |
| Storage | Dry cool conditions below 30°C (open boxes must be resealed) |
| Shelf life | 12 months below 30°C |
|
Curing schedule (at object temperature) |
10 minutes at 200°C |
Mechanical Tests
| Flexibility | ISO 1519 (cylindrical Mandrel) or ASTM D522 | Pass 5mm |
| Adhesion | ISO 2409 / ASTM D 3359 (2mm crosshatch) | Gt0 |
| Erichsen cupping | ISO 1520 | Pass >3mm |
| Impact resistance | ISO 6272:1993 / ASTM D2794 | Pass 2.5 Joules (reverse & direct (20 in lb) |
Pre-treatment
For maximum protection it is essential to pretreat components prior to the application of MT- D1036 Gloss/ Satin/ Matt Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. Galvanised steel requires surface preparation by either multi-stage pretreatment using either zinc phosphate or chromate conversion or controlled sweep blasting. Depending on the type of galvanizing, degassing or use of anti-bubbling additives may be required – follow the procedural advice of the pretreatment supplier. MT-D1036 products may also be used on cast or mild steel. For outdoor use, MT-PZ anti-corrosive primer over a correctly prepared substrate is recommended.
Application
MT-D1036 Gloss (85) powders can be applied by manual or automatic electrostatic spray or tribo-charging equipment. For solid shades, unused powder can be reclaimed up to a maximum of 30% using suitable equipment and recycled through the system. MT-D1036 powders should be applied at minimum 60µm. All powders can show small colour differences from batch to batch, this is normal and unavoidable. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid "marble effect"and changes in aspect after recycling. A constant ratio between virgin and recycled powders should be fixed by the coater in order to achieve a consistent effect. For more details it is suggested to read the "Metallic Application Guideline". Different substrates (aluminium, steel, galvanized steel…), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss.
Types of powder coating
Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).
在线联系供应商
Other supplier products
 |
Office Furniture Powder Coating | WA：+86 132 6275 2056 WEB: std-coatings.com Product Features Superior Charge Retention and Leveling: Offers higher gloss, full and bright appea... |
 |
Epoxy Anti-Corrosion Powder Coating for Firefighting Steel Pipes | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is formulated using linear phenolic epoxy resin, polyurethane-mo... |
 |
Polyester based powder coating MT-JA220G White | Product Description MT-JA220G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
 |
Polyester powder coatings for indoor applications with antimicrobial technology MT-310 AM | Product description MT-310 is a series of polyester resin based thermo-setting powder coatings, without TGIC with specific antimicrobial activity.... |
 |
Zinc-rich powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction This series of products is based on saturated carboxyl polyester resin and... |
Same products
 |
动态版激光驱鸟器应用变电站驱鸟 | 卖方: 深圳市特力康科技有限公司 | 产品名称：动态版智能激光驱鸟器 产品型号：TLKS-PSB102 产品类别：防鸟设备系列 一、产品概述 近年来，随着生态环境的不断改善，大自然中生活的鸟类种群数量及活动范围逐渐增大... |
 |
上海韩东 BDC 系列气动多片摩擦式离合器 | 卖方: 上海韩东机械科技有限公司 | 韩东 BDC 型气动多片离合器，通气接合、弹簧复位分离。体积小、传递扭矩大，散热性能好，可长时间连续工作。适配轮胎机械、压延、裁断设备，可与气胀轴、安全卡盘、气动制动器配套使用，质保 12 个月。 |
 |
brake NAB | 卖方: 上海韩东机械科技有限公司 | NAB 气动制动器（通轴摩擦式，正好适配 轮胎裁断 / 压延放卷） ✅ 工作原理 结构：活塞、摩擦片、复位弹簧、散热法兰、涨紧套（T 型）/ 键槽（S 型） 通气制动：压缩空气进入... |
 |
EPC-1 Italian Design G1 Size Automatic For Clean Water Pump, Centrifugal Pump Electric Pump Control | 卖方: 868713 | Zhejiang Monro M&E Co., Ltd. offers the EPC-1 Italian Design G1 Size Automatic Pump Controlle... |
 |
Knee Brace | 卖方: STERIGER | A knee brace is designed to provide comfortable support and stability during sports, daily activi... |
