Anmei-Polyamide Nylon 6 (PA6) for Engineering Plastics
Other than fiber-reinforcedpa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers, is also divided into toughened, heat-resistant, alloy and flame-retardant modified PA6.
Nylon 6 (PA6) is made up of a group of 6 carbon atoms. PAtype 6has a low melting point, a wide process temperature range, and strong impact resistance and solubility resistance. Both high tensile strength and super-high tensile strength Nylon6 (PA6) have excellent flexibility, impact resistance, low-temperature resistance, wear-resistance and dimensional stability of the nylon 6 material. PA6 flame retardant is mainly achieved by adding halogen-free flame retardant and halogen flame retardant to achieve the flame retardant effect. The physical and mechanical properties of these nylon 6 plastic materials are comparable to similar products in Europe and America. This series of halogen-free flame retardant products comply with RoHS environmental protection standards. The nylon 6 PA6price provided by Anmei is reasonable and high-quality nylon 6 plastic is available.
Types of Nylon 6 PA6 Plastic Material
The nylon 6 pa6 6 materialwe offer including the following three types: high tensile strength type, heat stabilized type and nylon flame retardants. Clickbelow to get more!
Nylon 6 PA6 impact resistance
Nylon has good impact resistance at room temperature, but the impact resistance at low temperature is not good enough. Therefore, the toughening modification of nylon is mainly to improve the impact resistance at low temperatures.
Nylon 6 PA6 impact resistance
Nylon has good impact resistance at room temperature, but the impact resistance at low temperature is not good enough. Therefore, the toughening modification of nylon is mainly to improve the impact resistance at low temperatures.
Nylon FR6 PA6 FR
Nylon flame retardants are divided into two categories: halogen series and halogen-free flame retardants according to whether they contain halogen.
PA6 vs PA66
The main varieties of nylon are nylon 6 (PA6) and nylon 66 (PA66), which are absolutely dominant. The difference between the two is as follows.
Nylon PA6 is poly-caprolactam, whilenylon 66 PA66is poly-adipic acid adipamide, PA66 is 12% harder than nylon PA6. PA6's chemical and physical properties are very similar to PA66, however, it has a lower melting point and a wide range of process temperatures. Nylon 6 plastic has better impact resistance and dissolution resistance than PA66, but it is also more hygroscopic. PA66 is a semi-crystalline - crystalline material with a higher melting point, which can also maintain strong strength and stiffness at higher temperatures.
- pa6 and pa66 difference
Polyamide nylon 6 has excellent thermal stability, high heat resistance; good dimensional stability; high surface quality; good anti-warping properties; PA66 has excellent wear resistance, good high impact resistance and good dimensional stability.
Nylon PA6 is generally used in automotive parts, mechanical parts, electronic and electrical products, engineering parts, etc. PA66 is more widely used in the automotive industry, instrument housings and other products that require impact resistance and high strength requirements, such as marine propellers, gears, rollers, pulleys, rollers, impellers in pump bodies, fan blades, high-pressure sealing enclosures, valve seats, gaskets, bushings, various handles, support frames, wire packages Inner layer, etc.
Drying process (If the material is sealed before processing, then there is no need to dry. If the storage container is opened, then it is recommended to dry the process in hot air at 85℃. (If the humidity is greater than 0.2%, vacuum drying at 105°C for 12 hours is also required.)
Melting temperature (230~280℃ for PA6, 250~280℃ for reinforced nylon; 260~290℃ for PA66. (275~280℃ for glass-modified products, melting temperature should be avoided higher than 300℃.)
Mold temperature (80~90℃, the mold temperature will affect the crystallinity, and the crystallinity will affect the physical properties of the product)
Injection pressure (usually at 750~1250bar, depending on the material and product design.)
Injection speed (high speed (to be slightly reduced for reinforced nylon))
Runners and gates (solidification time is very short, so the location of the gates is very important)
Introduction of Nylon PA6 halogenated &halogen-free FR plastic
Nylon flame retardants of polyamide nylon 6 are divided into two categories: halogen series and halogen-free flame retardants according to whether they contain halogen.
▲ Halogen-based flame-retardant nylon PA6 has good thermal stability and good fluidity during processing. It is mainly suitable for the production of small, thin-walled, complex-structured components, such as switches, reconnectors, and plug-ins;
▲ Halogen-free flame-retardant nylon PA6 is used in flame-retardant reinforced nylon varieties with strict environmental protection requirements. Phosphorus flame-retardant nylon has good mechanical properties and is suitable for electronic and electrical parts.
Please put forward your needs, and Anmei engineers will deploy suitable nylon PA6 flame-retardant modified plastics according to your comprehensive index.
Why choose Anmei modified Nylon 6 PA6
Reason One
Specialized in several modified plastics of Nylon6/66, TPU, ABS and PBT.
Reason Two
The brands we have been served in the field of fiber optic cables and home appliances are the top three in the industry.
Reason Three
Technical support from the world's top 500 companies and passed ISO and UL factory audits.
Anmei Nylon 6 Plastic Material Features
Polyamide has poor impact strength at low temperature and dry statement and has a large water absorption rate. In response to these shortcomings, the tensile strength polyamide of Anmei is adding a certain amount of rubber or elastomer to nylon to double its impact strength. And more is toughened by the elastomer. It can effectively improve the impact resistance and low-temperature performance of our nylon 6 plastic material. And toughening by elastomer can effectively improve the impact resistance and low-temperature performance of nylon PA6.
After toughening:
If your product just needs to match these functions, please contact our engineers for further information.
If you have needs to buy masterbatch, please leave us a message.
在线联系供应商
Other supplier products
 |
PA6 GF15 With High Tensile Strength (A1307C, A1317C) for Engineering Plastics | PA6 15GFwith high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Applicatio... |
 |
Engineering Plastic Application for Different Industries | Engineering Plastic Applicationfor Different Industries Anmei, one of the most experienced engineering plastic andmasterbatch producers, offers ... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | PA6 GF 30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated FR Features Glass fiber reinforced 30% ... |
 |
Anmei-Polyamide Nylon 66 (PA66) for Engineering Plastics | Nylon 66 is polyamide 66. The main purpose of Nylon 66 plastic modification is to improve the properties of Nylon 66 material based on the original... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmei focuses on the production of modified engineering plastics. We have polyamide pa66modified products with properties of heat-resistant, rei... |
Same products
 |
One-Stop Solution PEEK Connector Multi-Cavity injection mold Injection molding Plastic injection mold | 卖方: 840661 | TECHMOULD: Your Premier PEEK Injection Mold Manufacturer At TECHMOULD, we are a leading injectio... |
 |
Agri Flex Textile Fire Hose | 卖方: Zhejiang Fengruichen Fire Fighting Equipment Co., Ltd. | AgriFlex is a textile hose suitable for agricultural irrigation spray guns, industrial and mining... |
 |
Pip conveyor belt | 卖方: ZHEJIANG FUDA RUBBER CO.,LTD | Features(Pip conveyor belt):Excellent flexibility , high speed, large angles of inclination trans... |
 |
Pet Supplies | 卖方: O&K GROUP LIMITED | Okwishing supplies all kinds of Pet Supplies. Okwishing () is a cross-border e-commerce platform ... |
 |
Popular home applianPopular home appliance plastic casings Over mold plastic mold insert over molding 2K mould Injection Mouldingce plastic casings Over mold plastic mold insert over molding 2K mould | 卖方: 840661 | TECHMOULD help our customers to take their ideas to finished product. We not only provide mold de... |
