Tin cure liquid molding silicone rubber for plaster casting cornice mold
Tin cure liquid molding silicone rubber for plaster casting cornice mold
Plaster Molding Silicone
Plaster Ornamentation Molding silicone
Plaster is an age-old casting media used today for casting statuary, home decor items (e.g., lamps, wall plaques) as well as ornamental moldings and decorative millwork.
GC Silicone manufactures two-component, room temperature curing silicone mold materials that are used widely in the plaster casting industry to create highly detailed plaster parts.
Plaster can be cast repeatedly into silicone molds without release agents. The primary differences between polyurethanes and silicones are the cost (silicones are more expensive than polyurethane) and the range of hardness available within the product lines. For highly detailed and delicate castings, silicone rubbers may be necessary as they are available in softer and more flexible options compared to polyurethanes.
The popular silicone mold rubber is C-820/C-825 for these applications. A tin-cured silicone rubber with a 1A:10B mix ratio; measure with a digital scale.
|
Typical general characteristics |
Inspection Method |
Value |
|
|
Product data (Catalyzed A+B) |
C-820 |
C-825 |
|
|
Hardness |
Shore A |
20±2 |
25±2 |
|
Mix Ratio |
A:B |
100:3 |
100:3 |
|
Color |
/ |
White |
White |
|
Pot life |
25 °C (77F) |
30-40mins |
30-40mins |
|
Curing time |
25 °C (77F) |
3-4 hours |
3-4 hours |
|
Mixed viscosity |
16000±1000 |
20000±1000 |
|
|
Tear-strength |
kg/cm |
20±2 |
22±2 |
|
Tensile-strength |
|||
|
Elongation |
% |
400±50 |
450±50 |
|
Shrinkage |
% |
≤0.3 |
≤0.3 |
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
Making molds for
-statuary
-home decor items,e.g., lamps, wall plaques
-plaster cornice, decorative millwork
Low viscosity,Extra low shrinkage,Pouring and brushable silicone,High tear strength,various color is available,High reproduction rate
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
在线联系供应商
Other supplier products
 |
Skin safe liquid silicone rubber for mask making | Skin safe liquid silicone rubber for mask making Mask Making & Make Up FX Silicone RT-8 series silicone is great to make silicone mask produc... |
 |
Where to buy silicone rubber molding material for shoe sole mould | Where to buy silicone rubber molding material for shoe sole mould Shoe Sole molding Silicone GC RTV silicone C-825 are good for shoe sole molding... |
 |
Cheap liquid silicone rubber to make molds for lost was casting | Cheap liquid silicone rubber to make molds for lost was casting Lost Wax Casting Silicone GC RTV silicone C-825 are good for lost wax casting. Th... |
 |
China manufacturer mold making liquid silicone rubber for Grc Gfrc moulding | China manufacturer mold making liquid silicone rubber for Grc Gfrcmoulding Grc & Gfrc Molding Silicone GRC/GFRC is a new kind of material use... |
 |
Free sample rtv2 mould making silicone rubber for Architectural Molding | Free sample rtv2 mould making silicone rubber for Architectural Molding Architectural Molding Silicone Product No.: C-825 and C-830 Brand: GuoC... |
Same products
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | 卖方: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | 卖方: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | 卖方: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | 卖方: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
 |
Silicone Sphere Tray | 卖方: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |
