Surface Mount Package HF RFID Module JMY622
JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards. And the module and antenna is linked by 50ohm coaxial line. The impedance between RF module and antenna was tuned by impedance analyzer; so the module has excellent read/write performance and stability. Though the wire can reach 10m, but the performance is good. Normally the wire should be 60cm that is the module's best performance and stability. JMY622 adopts surface mount installation form. Small size is a major feature of JMY622. JMY622 has many kinds of funtions and it can support various contactless IC card under international standards. Meanwhile it can support the cards from different suppliers. Designer classified&integrated the operation commands for contactless IC cards. In this situation, the uesr can operate it easily via sending simple commands. The most important features for JMY622 is that it can support contactless IC cards(T=CL) fully. It can send and receive more than 256 Bytes APDU commands and also support FSDI=8.
Qualifications:
- PCD: NXP SL RC400, NXP MF RC500, NXP MF RC531, NXP CL RC632
- Working frequency: 13.56MHz
- RF standard: ISO14443A, ISO14443B, ISO15693
- Operating distance: 100mm(depending on card and antenna design)
- Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default OFF; Can be set.
- Interface: IIC, UART(selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps
- Max.command length: 511 Bytes
- Interface level: 3.3V (TTL level; 5V tolerance)
- Power supply: DC 3.3V + 5V(±0.5V)
- Power consumption: 100mA
- Dimension: 22mm×35mm
- Package: Surface Mount
- Weight: about 10g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
在线联系供应商
Other supplier products
3 SAM slots hf 13.56mhz rfid reader/writer - MR790 | MR780 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ... | |
13.56MHz RFID Reader and writer Module JMY604 with RS232C interface | JMY604 series are RFID reader/writer module with UART serial ports. JMY604 has various functions and supports multi ISO/IEC standard of contactless... | |
LED Nixie tube with 8 bits LED display HF 13.56MHz RFID Reader/writer - mr600 | MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED Nixie tube which with 8 bits ... | |
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY680 | JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of cont... | |
RS232C interface HF RFID Reader/Writer Module JMY612 | JMY612 series are RFID reader/writer module with RS232C serial ports. JMY612 has various functions and supports multi ISO/IEC standard of contactle... |
Same products
MECHANIC iScout 热成像摄像机主板故障分析仪 | 卖方: PHONEFIX technology Co.,Ltd | 描述Mechanic iScout 红外热成像摄像机电子电路板故障分析仪,用于手机/iPhone/iPad/平板电脑 PCB 分析、诊断和故障排除。Mechanic iScout 热像仪具有 2... | |
智能应用程序控制 WiFi 烟雾探测器报警器适用于家庭安全火灾报警 | 卖方: 深圳市巡鹰安防科技有限公司 | 无线光电烟雾火灾探测报警器(简称“烟雾探测器”)是一种通过感应烟雾来探测火灾的设备。当产生烟雾并达到一定浓度时,设备会发出声光报警信号,同时向主机发送无线信号,提示您现场... | |
无线紧急求救按钮个人医疗报警器老人儿童/残疾人紧急求助按钮 | 卖方: 深圳市巡鹰安防科技有限公司 | 这是一款医疗求助按钮,当需要帮助或者遇到危险时,可以按下按钮触发报警,触发报警后会通过无线信号连接主机,向相关联系人推送APP通知,发短信、打电话。适合老人、小孩、残障人士使用,适用于养老院、居... | |
用于家庭安全报警系统的无线 RFID 触摸键盘开关按钮 | 卖方: 深圳市巡鹰安防科技有限公司 | 这是一款无线触摸键盘,是入侵报警系统的组成部分,通过触摸密码或RFID即可控制家庭安防系统的布防、撤防,让您更方便快捷地维护家庭安全。 主要特点:- 通过键盘可对主机进行布防、撤防、居家布防、... | |
无线 PIR 运动传感器人体传感器红外探测器警报用于入侵者报警系统 | 卖方: 深圳市巡鹰安防科技有限公司 | 无线红外探测器是根据人体红外光谱和多普勒运动检测技术的原理设计的,配备特殊的滤光镜片和先进的信号分析技术,可用于银行、仓库、办公楼、家庭、卡车、船舶、车库等场所。其他地方。通过无线信号与主机连接... |