IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801
JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The modules build in SAM slot. It could operate contact smart card according to ISO7816. The module has a length of 506 bytes command buffer could send APDU over 256 bytes to T=CL smart cards and SAM cards. The modules support FSDI=8 of ISO14443-4. The module and antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. There is ferrite plate between main PCB and antenna, so such design applies to some metallic-around systems.
Qualifications:
- PCD model: NXP RC500, RC531, RC400, RC632
- Working frequency: 13.56MHz
- Supported standard: ISO14443A, ISO14443B, ISO15693, ISO7816
- Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only
- Auto detecting card: Supported, default OFF. The default state can be set.
- SAM slot: 2 slot
- SAM baud rate: 9600bps/38400bps/19200bps(default)/115200bps/57600bps.
- ISO7816 PPS : Supported
- EEPROM: 512 Bytes
- Power supply: DC 5V (±0.5V)
- Interface: IIC/UART/RS232C/USB HID (select when place order)
- Communication rate: IIC: 400Kbps; UART/RS232C/USB: 19.2Kbps/115.2Kbps; USB: USB 2.0 HID
- Max. command length: JCP04 254 Bytes; JCP05 511 Bytes.
- Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance)
- Power consumption: 150mA
- Operating distance: 80mm (depending on card and antenna design)
- Dimension: 70mm*50mm*16.5mm
- Weight: About 120g
- ISP: Supported
- Operating temperature: -25 to +85°C
- Storage temperature: -40 to +125°C
- RoHS: Compliant
在线联系供应商
Other supplier products
arm7 mcu hf 13.56mhz rfid desktop reader and writer with usb pc/sc interface - mr810 | MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, IS... | |
RS232C interface HF RFID Reader and writer Module JMY603 | JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless... | |
hf 13.56mhz ISO15693 ID reader - mr760 | MR760 series, based on NXP SL RC400, is the desktop reader. The reader supports series IC cards according to ISO15693, and the reader imitates the ... | |
Low cost hf 13.56mhz rfid reader/writer-mr701 | MR701 series, based on NXP PCD or compatible PCD, is popular and high performance desktop reader. The reader supports series IC cards according to ... | |
NXP RC522 RC523 HF RFID ID card Reader Module JMY609 | JMY609, based on NXP PCD, is the reader module. The module supports series IC cards according to ISO14443A, ISO14443B and imitates the USB keyboard... |
Same products
Steel Frame Farm Buildings | 卖方: HeiBei ZhongTai Steel Structure Technology Co.,Ltd | Steel Frame Farm Buildings Agricultural steel hay storage buildingsare classified as follows acc... | |
Prefab Steel Warehouse | 卖方: HeiBei ZhongTai Steel Structure Technology Co.,Ltd | Prefab China Steel Frame Warehouse Prefab house for warehouseis a kind of new concept of environ... | |
Prefab Steel Home | 卖方: HeiBei ZhongTai Steel Structure Technology Co.,Ltd | Prefab Steel Home Pre built steel homeshas all the characteristics of mobile housing, as follows... | |
Prefab Steel Canteen | 卖方: HeiBei ZhongTai Steel Structure Technology Co.,Ltd | Prefab Steel Canteen The pre fabricated steel housefor Mess hall is a refinement of the function... | |
Prefab Agricultural Buildings | 卖方: HeiBei ZhongTai Steel Structure Technology Co.,Ltd | Prefab Agricultural Buildings As a classification of mobile housing products, The Agricultural p... |