Aquamatic K52 Valve

K521/2-inch to 2-1/2-inch "Y" pattern diaphragm valvesGlass-filled thermoplastic body and capFeatures & BenefitsLarge Seat opening and high lift-disc for higher flow rates at a lower pressure lossSeparate flow and control chambers permit positive closing without springs; and only nominal cost for spring assist opening for low-pressure and self-draining applicationsCost-effective solution both in initial cost,Website:, as well as lifetime maintenance expensesSeparate diaphragm chambers protects the diaphragm from the flow stream, while allowing the valve to be serviced in-linePre-formed, stress relieved diaphragm minimizes fatigue, maximizes valve responsiveness and diaphragm lifetimeAll internal parts in contact with media are made of composite materialsCan be actuated with either air or water as control fluidDesigned for water treatment applications including those requiring acids, caustic and harsh chemicals that would rapidly corrode medtal valvesFeatures & BenefitsLarge Seat opening and high lift-disc for higher flow rates at a lower pressure lossSeparate flow and control chambers permit positive closing without springs; and only nominal cost for spring assist opening for low-pressure and self-draining applicationsCost-effective solution both in initial cost, as well as lifetime maintenance expensesSeparate diaphragm chambers protects the diaphragm from the flow stream, while allowing the valve to be serviced in-linePre-formed, stress relieved diaphragm minimizes fatigue, maximizes valve responsiveness and diaphragm lifetimeAll internal parts in contact with media are made of composite materialsCan be actuated with either air or water as control fluidDesigned for water treatment applications including those requiring acids, caustic and harsh chemicals that would rapidly corrode medtal valvesAccessories & OptionsSeal and diaphragm materials availableSpring assist (open or closed)Normally open or closedPosition indicatorK55 isolated bonnet valve
Other supplier products
|
|
|
MELT BLOWN FILTER CARTRIDGESJM melt blown filter cartridges are self-bonded and structured with three different fibers,Website:, inside thin and ou... |
|
|
|
Fleck valve 3900Name: Fleck valve 3900 3" Commercial Control ValveFeatures:1.Fully adjustable,Website:, 5-cycle control delivers upflow back wash, ... |
|
|
|
UV disinfectionJMFS Series Potable and high purity water applications 304 Stainless Steel,Website:, electropolished and passivated inside and out, ... |
|
|
|
FRP TANK
FRP TANK Specification:
1)Material:inner shell-Polyethylene (PE),Website: shell-Fiberglass with Epoxy resin
2)Work... |
|
|
|
Stainless Steel Ro Membrane Housing4 inch end Stainless Steel Ro Membrane Housing4 inch Stainless Steel Ro Membrane HousingUse:1,Website:, all made... |
供应产品
Same products