.

Compound Antenna Feeder Protector

Designed for antenna coaxial device and receive system not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.

IEEE 802.11b and 802.11g WLAN

2G,3G,4G, 5G communication

GSM, CDMA, WCDMA, TD-LTE, FDD-LTE

Smart antenna, SDMA

Information about RF surge arrester, rf surge arrestor, just visit our website.

Technical ParametersOf Compound Antenna Feeder Protector

Model

R27D-FH

R27N-FH

Lightning protection zone(LPZ)

1-2

Class

According to DIN VDE 6075 Part 6 (Draft11.89)A1, A2

C

According to IEC61643

II

Max continuous operating voltage Uc

≤70V

Max discharge current Imax (8/20µs) Imax

20KA

Working frequency--E1 port transmission

2M

Working frequency--RF transmission

Protection level Up ( In )

≤200v

Insertion Loss

≤0.15db

Standing-wave ratio

≤1.15

Interface form

DIN

N

Working conditions

Temperature: -40 to 80℃, Relative humidity: ≤95%

Standards compliance

IEC6000, EN60950

Mounting

Be installed between protected equipment and the signal line

Material

stainless steel+Copper/ silver white

IP code

IP20

Features Of Compound Antenna Feeder Protector

DC pass

Allow 2.176MHz signal to pass for AISG system

Reliable Performance from 698 MHz to 2.7GHz (DC pass)

DC continuity on the center conductor for reliable operation

Multiple strike protection provides the current handling capability of 20KA

Replaceable gas capsules for easy maintenance

Outstanding VSWR and IM performance

Bi-Directional Protection

Reverse installation is possible without performance impact

Techwinis a professional spd factory, and we have a lot of experience. If you want to buy a smart surge protectorand we are a good choice.


在线联系供应商

至: Shenzhen Techwin Lightning Technologies Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

100KA DIN-rail Mounted Large Discharge Current AC Power SPD
100KA DIN-rail Mounted Large Discharge Current AC Power SPD M100 series power supply system AC modules are mainly applicable to the power distribution systems for class I / type 1 protection. Type 1 spd surg...
2 in 1 SPD for CCTV
2 in 1 SPD for CCTV 2 in 1 cctv lightning surge protectors(power and network/ power and video/ power and control), aredesigned for a digital camera to protect the came...
Type 1+2 /Class B+C Switch-type Gap Technology Lightning Surge Protector with TUV mark
Type 1+2 /Class B+C Switch-type Gap Technology Lightning Surge Protector with TUV mark These series products are mainly used for Type 1+Type 2 protection of power distribution systems (10/350µs) and are used to protect electrica...
Video Lightning protector for analog camera CCTV system
Video Lightning protector for analog camera CCTV system Video signal protector is designed for analog video/digital camera to protect electrical and electronic equipment's signal line from the impact of ...
DIN-rail mounted DC power Surge protective device(SPD)
DIN-rail mounted DC power Surge protective device(SPD) DC power supply SPD, also called DC lightning arrestor or DC surge suppressor, is designed for the protection of DC power circuit from the damage o...
供应产品

Same products

Ballistic Plate
Ballistic Plate 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Ballistic Plate A can be matched with bulletproof vest as the front or back plate to enhance...
ballistic helmet
ballistic helmet 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD ballistic helmet A , often referred to as a tactical helmet, is a specialized piece of perso...
bulletproof vests
bulletproof vests 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD bulletproof vests stands out as one of the premier manufacturers and suppliers in China, ren...
Bulletproof Briefcase Shield
Bulletproof Briefcase Shield 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Bulletproof Briefcase Shield Bulletproof Briefcase Shield Description This is a discreet, r...
Military Ballistic Helmet
Military Ballistic Helmet 卖方: YONGKANG LONGKUI NEW MATERIAL CO.LTD Military Ballistic Helmet Welcome to our comprehensive overview of the , a crucial asset in ...