What are the classifications and load types of off-grid inverters?
What are the classifications and load types of off-grid inverters?
Inverters can be divided into two main categories according to the waveform, one is a pure sine wave inverter and the other is a modified wave inverter.
The rectified sine wave inverter uses PWM pulse width modulation to generate a corrected wave output. Due to the existence of about 20% harmonic distortion, it cannot carry inductive loads such as air conditioners but can carry resistive loads such as lamps.
The rectified sinusoidal inverter uses a non-isolated coupling circuit, which is simple to install and highly efficient. Pure sine inverters use isolated coupling circuit design, which is complex and costly, and can be connected to any common electrical equipment (including TVs, LCDs, etc., and especially inductive loads such as refrigerators) without interference.
Off-grid inverters can be divided into high-frequency machines and industrial-frequency machines according to the degree of isolation.
High-frequency switching components using high-frequency switching technology or high-frequency isolation transformers instead of the industrial-frequency transformers in the inverter are called high-frequency inverters; those with industrial-frequency isolation transformers are called industrial-frequency inverters.
The advantages of the industrial frequency inverter are stable and reliable power components, strong overload capacity and strong shock resistance, the disadvantages are low efficiency, heavyweight and expensive. There are two types of high-frequency inverters, high-frequency isolated and low-frequency isolated. The advantages are small size, high efficiency and low price, the disadvantage is that the shock resistance is slightly lower.
The output power of the inverter needs to be greater than the load power. For demanding applications such as monitoring stations and communication stations, the output power is the sum of all load powers. However, for a typical household, considering that all loads cannot be switched on at the same time, a factor of 0.7-0.9 can be multiplied by the sum of the load powers in order to save costs.
In PV off-grid systems, the power of the off-grid inverter is usually determined according to the type and power of the customer's load. Loads can be divided into resistive loads, inductive loads and capacitive loads.
Resistive loads: Loads with no phase difference in voltage are resistive loads, such as rice cookers, electric bulbs, electric heaters, electric soldering irons, etc.
Capacitive load: the load with phase difference of voltage when the current is ahead is capacitive load, such as compensation capacitor, computer, TV, etc.
Inductive load: When the current lagging voltage is a phase difference, the load is an inductive load, such as a washing machine, air conditioner, refrigerator, water pump, hood and other loads with motor and transformer, relay, compressor, etc.
The starting power of inductive loads such as motors is 5 to 7 times the rated power. When estimating the power of the inverter, the starting power of these loads should be taken into account.
If the load is a lift, for example, it must not be connected directly to the output of the off-grid inverter, because when the lift falls, the motor reverses and a counter-electromotive force is generated, which enters the inverter and can easily damage it. If disconnection is necessary to use the grid system, it is recommended to add an inverter between the inverter and the lift motor.
Now the price of microtek company inverteris reasonable, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
How to choose an off-grid solar inverter? 11 Things to consider. | How to choose an off-grid solar inverter? 11 Things to consider. What is an off-grid solar inverter? An off-grid solar inverter is a type of so... |
 |
Military Patches | Military patches are widely used into military uniform, some badges and rank are glued to specific parts. When wearing special camouflage uniforms,... |
 |
Multicam Army Uniform Romania Army Force | This combat uniform was special designed for Romania army, draw on multicam style army uniform design, the main background sections consist of gree... |
 |
Anti Riot Shield | As one of the military supplies suppliersin China, XinXing JiHua company have own design center and fabric processing factories. We can picking raw... |
 |
Multiple Categories for Personal Protective Gear | No matter official department, professional workers or civilian, everyone need ppe stand for personal protective equipmentto avoid harm and keep sa... |
Same products
 |
High-Compression Bandage | 卖方: manager | Elastic High-compression Bandage is a specialized medical wrapping used primarily for prov... |
 |
Ice Wrap Cold Bandage | 卖方: manager | Ice Wrap Cold Bandage/Coolings Bandage is a reusable, cooling, compression bandage proven ... |
 |
Pain Relief Tape | 卖方: manager | SCICO CARE’s pain relief tape is specially designed to provide targeted support, redu... |
 |
Flexible Sports Tape | 卖方: manager | SCICO CARE specializes in manufacturing high-quality flexible sports tape designed for athl... |
 |
Custom Athletic Tape | 卖方: manager | CARE offers premium-quality custom athletic tape designed to enhance performance, prevent inj... |
