Thermal Radiation Flame Propagation Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The instrument complies with domestic and international standards, including:
NF P92-501 – Rate of flame spread for building materials
TB/T 2639.1 – Fire performance testing of railway materials – Radiation test method
ISO 5660 series – Reaction-to-fire tests, heat release rate
ASTM E1354 – Standard test method for heat and visible smoke release rates for materials using oxygen consumption calorimeter
EN 13823 – Reaction to fire tests for building products – Building products excluding floorings exposed to the single burning item
GB/T 28752-2012 – Test Method for Lateral Flame Spread on Vertical Surfaces
ISO 5658-2 – Fire Spread Test for Vertical Surfaces of Building Products
IMO Res.A653(16) – Surface Flammability Test for Bulkhead, Ceiling, and Deck Materials
Instrument Features
(1) Stainless Steel Test Chamber – Interior lined with fire-resistant materials and equipped with transparent observation window.
(2) Air Supply System – Stainless steel tubular inlet with filtration to prevent contamination.
(3) 45° Sample Test Holder – Stainless steel ruler for accurate flame spread distance measurement.
(4) Thermal Radiation Source – Provides adjustable 30 kW/m² heat flux; panel displays real-time power output, eliminating frequent calibration.
(5) Top and Bottom Stainless Steel Burners – Ignites volatile gases; needle valves control flame height with flame height gauges.
(6) Pilot Flame System – Convenient ignition before testing for upper and lower burners; quarter-turn plug valve allows easy flame isolation.
(7) Temperature Monitoring – Thermocouples at top and air inlet display real-time temperature differences.
(8) Software Control – Automated calculation of flame indices: Flame Initiation Index (i), Average Flame Height Index (S), Maximum Flame Height Index (h), and Heat Release Index (C); built-in report generation and print capability.
Technical Specifications
| Parameter | Specification |
|---|---|
| Overall Dimensions (W×D×H) | 1900 × 460 × 2100 mm (74.8 × 18.1 × 82.6 in) |
| Shipping Weight | 208 kg (Main unit: 158 kg; Table: 50 kg) |
| Radiation Source Rated Power | 500 W |
| Power Meter Accuracy | 0.5 class |
| Gas Regulation Valve Pressure Range | < 0.1 MPa |
| Electrical Supply | AC 220V, 50Hz, 550 W |
| Sample Thickness | >5 mm |
| Heat Flux | Adjustable, up to 30 kW/m² |
| Test Angles | 45° sample holder with scale |
| Flame Height Control | Needle valve with flame gauge |
| Data Outputs | Flame initiation index (i), average flame height (S), maximum flame height (h), heat release index (C) |
Accessories
(1) 45° stainless steel test holder with measurement scale
(2) Transparent observation window
(3) Air filtration unit for clean airflow
(4) Thermocouples and digital display
(5) Software package with automated calculation and reporting
Test Procedures / Maintenance
(1) Mount the sample on the 45° test holder.
(2) Adjust the thermal radiation source to the required 30 kW/m² heat flux.
(3) Ignite top and bottom burners using pilot flame system.
(4) Observe flame propagation and record data via software.
(5) Software automatically calculates flame indices and generates reports.
(6) After testing, extinguish burners, clean chamber interior, and remove residue.
(7) Regularly calibrate radiation flux, thermocouples, and flame height gauges to ensure accurate results.
在线联系供应商
Other supplier products
 |
Automotive Sunshade Assembly Line，Sunshade component assembly production line | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Automotive Sunshade Assembly Line is an integrated automated production system designed... |
 |
Fire Retardant Coatings Tester – Tunnel Method | Whats/App: +86 156 1874 6768 Web: standard-groups.com The fire retardant coating flame propagation tester is suitable for testing the flame propa... |
 |
Geomembrane Fracture Resistance Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes ... |
 |
Industrial large walk-in aging test chamber supplier | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com TheLarge Walk-In Aging Chamberis designed for long-duration temperature and h... |
 |
ASTM D1204 Compliant Thermal Shrinkage Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com The dry heat shrinkage tester is a crucial instrument for testing the dimensional changes o... |
