Textile formaldehyde content tester

Introduction

In China, the national mandatory standard "national textile products basic safety technical specifications" GB18401-2003. with effect from 1 January 2006 to enforcement, clearly defined the safety requirements of formaldehyde and other harmful substances in textile products. January 1. 2010 from the implementation of a number of national standards for clothing and textiles: "woven student service" GB / T23328-2009. "male suit, coat" GB / T2664-2009. "female suit, coat" GB / T2665- 2009. "trousers" GB / T2666-2009. "tie" GB / T23314-2009. etc., also clearly put forward the restrictions of the formaldehyde content.

Standards

1. GB/T2912 Textiles - Determination of formaldehyde - Part 1: Free and hydrolyzed formaldehyde

2. AATCC 112 Textiles - Determination of formaldehyde - Vapor absorption method

3. BS6806 Textile formaldehyde testing

4. DIN EN ISO14184.2 Textiles-Determination of formaldehyde-Part2: Released formaldehyde (vapor absorption method)

Application

Textile formaldehyde content tester is used to determinate the formaldehyde content in the various textiles, clothing fabrics, often using water extraction method to prepare formaldehyde solution, and then after the color reaction with the Nessler reagent, the software can be tested out the formaldehyde content in textiles.

Feature

1. The instrument uses 128 * 64 bit dot matrix LCD display, clear display, accurate reading, stable and reliable.

2. It can continuously test and store 200 sets of data, each screen can display 5 groups.

3. C mode (standard curve method) can directly establish a multi-point standard curve, and can be used to build the standard curve for unknown sample concentration test.

4. It can store 200 standard curve, can be called free according to the number.

5. F mode (coefficient method) can enter the coefficient of the curve equation directly after the sample measurement.

6. Measured and stored data has power off function.

7. Wavelength can be automatic calibration, automatic setting, self-repair deviation.

8. Socket type deuterium lamp, tungsten lamp design, light change free from optical debugging.

9. With a standard USB data output interface and parallel print output interface to facilitate online operation and print data.

10. Matching quantitative software can be directly completed photometric analysis and quantitative testing and analysis of data processing.

Parameters

1. wavelength range: 190-1000nm

2. spectral bandwidth: 4nm or 2nm optional

3. wavelength accuracy: ± 1nm

4. wavelength repeatability: ≤ 0.3nm

5. the wavelength set the way: automatic

6. wavelength resolution: 0.1nm

7. luminosity accuracy: ± 0.5% T

8. photometric repeatability: ≤ 0.2% T

9. stray light: ≤ 0.05% T

10. data output: USB interface

11. stability: ± 0.001A / h (500nm after preheating)

12. luminosity range: 0-200% T, -0.3-3A, 0-9999C

13. print output: parallel port

14. display system: 128 * 64-bit large-screen LCD

15. light source: long life imported tungsten lamp, deuterium lamp

16. detector: imported silicon photodiode

Other supplier products

	Electrolyte wettability test system	Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ...
	Impact strength tester for car seat headrest	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie...
	perspiration fastness tester	Content I. Product Overview TheSweat Color Fastness Testeris a specialized instrument designed to evaluate the colorfastness of textiles agains...
	Static Tensile Tester	Static tensile testerApplicationUsed for static tensile test of elastic fabric performance, adopts aviation aluminum frame design, 304 stainless st...
	Dry Sand Rubber Wheel Wear Tester	Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...

供应产品

Same products

	Steaming Cylinder	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15....
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061...
	Button Impact Tester丨Button Impact Test mechine	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt...
	AATCC Viewing Board丨AATCC Viewing Board tester	卖方: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ...