ISO 4892 Solar Light Aging Tester Xenon Arc Accelerated Aging Test Chamber
HJ ISO 4892 Solar Light Aging Tester Xenon Arc Accelerated Aging Test Chamber Xenon Lamp Weather Resistant Aging Testing Chamber adopts xenon arc lamp that can simulate the full sunlight spectrum to reproduce the destructive light waves in different environments, which can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control. Xenon lamp test chamber can be used for selecting new materials, improving existing materials or evaluating the durability of changes in material composition. It can well simulate the changes of materials exposed to sunlight under different environmental conditions.
Specification
|
Model number |
150 (the air-filled type) |
225 (the air-filled type) |
408 (the air-filled type) |
|
Studio size(D*W*H)mm |
500x600x500 |
500x600x750 |
800×850×650 |
|
Overall dimension |
1030×1090×1640 |
1440x1280x2060 |
1440×1380×2060 |
|
Total power |
11.5KW |
12.5KW |
14.5KW |
|
Net weight |
340KG |
460KG |
660KG |
|
Blackboard temperature range |
65~98%R.H |
Rainfall time |
1-9999 minutes, adjustable |
|
Rainfall cycle |
1-240 minutes, interval (break)adjustable |
Water spray pressure |
0.12-0.15 mpa |
|
Measured wavelength |
400mm-1000mm |
irradiance |
150W/m2 736W/m2 |
|
Xenon lamp power |
Imported 1.8KW (life 2000 hours) |
||
在线联系供应商
Other supplier products
 |
Plastic ball indentation hardness test machine | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | The Powder Wet Vibrating Screen System is designed for particle size separation and distribution analysis of lithium battery materials under wet co... |
 |
Hot Tack Tester / Heat Seal Tester | Main Uses of the Hot - Tack Tensile Tester The hot - tack tensile tester is an instrument specifically designed to test the hot - tacking and heat... |
 |
Puncture Strength Tester STD - NDG5 | Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) SAE J2749 (Automotive Composite Testing) JI... |
 |
Large-Area 3D Optical Surface Profilometer | Large-Area 3D Optical Surface Profilometer is a high-performance three-dimensional optical metrology system designed for large-area surface topogra... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
