Textile Leather Testing Equipment for ISO 11640
Application
IULTCS Rubbing Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of ‘marring’ of the leather surface or the finish and to assess the amount of color transfer from the sample to the rubbing pad under dry or wet conditions.
Test Procedure
The sample is placed on the test surface and clamped; pre-tensioning can be effected by adjustment of the knob or screw in requested percentage. The felt pad is inserted in the end of the rubbing head and the tester switched on. The material surface and the rubbing pad are inspected visually. In the case of colour transferring, the wool-felt rubbing pad is evaluated using the grey scale.
IULTCS Rubbing Fastness Tester Specifications
lRubbing finger: 500±25 g(or 1000g by adding a load mass)
lLoading weight: 500±10 g
lDimension of base of finger: 15 x 15 mm
lSpecimen: 120x20mm
lRubbing stroke: 35 ~ 40 mm
lSpeed of rubbing: 40± 2cycles/min
lCounter: LCD,1-999.999 times, automatically stops
Specifications
| Model load | GX-5042 |
| Friction hammer | 500g |
| Auxiliary load | 500g |
| Rubbing length | 35mm ~40mm |
| Speed of abrasive head | 40±2 R/min |
| Area of specimen | 120×20mm |
| Motor | DC 120W |
| Area of wool felt | 15×15mm |
| Weight | 5N, 9N for each |
| Counter | LED,0~999.999 |
| Power | 1.AC220V,2A |
在线联系供应商
Other supplier products
 |
Bone Plates Four-point Bending Fatigue Tester | Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ... |
 |
Pinhole Tester | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials. The following is a detail... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
Particle Abrasion Tester | The Particle Abrasion Tester (Q-4D) is a precision instrument designed to measure the wear rate of granular materials such as catalysts, molecular ... |
 |
Geomembrane Fracture Resistance Tester | Standard ASTM D7176(Standard Test Method for Determining the Resistance of Geomembranes to Slow Steady-State Strain) ISO 17548(Geosynthetics - ... |
Same products
 |
Steaming Cylinder | 卖方: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | 卖方: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | 卖方: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | 卖方: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | 卖方: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
