Junk Mills
Triplex Mud Pump
F Series Triplex Mud Pump is designed according to Emsco F series mud pump, its expendable parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
Features of F Series Triplex Mud Pump:
A solid and compact structure, miniature volume, good and reliable performance, which can meet the drilling requirements such as high pump pressure and big displacements in the oil field.
F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of expendable parts in the fluid end greatly.
The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pumps are widely used in the oilfields and other industrial mining enterprises for well drilling and well repairing etc.
This series mud pump are strictly manufactured according to API Spec 7k “the Equipment Specification of Well Drilling and Repairing”, and are tested accordingly when leave factory.
Specification:
Model F-500 F-800 F-1000 F-1300 F-1600
Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Triplex single acting
Rated Power 373kw
500HP 596kw
800HP 735kw
1000HP 969kw
1300HP 1193kw
1600HP
Rated Speed 165 SPM 140 SPM 140 SPM 120 SPM 120 SPM
Stroke(mm/inch) 190/7 1/2″ 254/10″ 254/10″ 305/12″ 305/12″
Max.Liner Dia. 170/6 3/4″ 170/6 3/4″ 170/6 3/4″ 180/7″ 180/7″
Gear Type Herringbone Herringbone Herringbone Herringbone Herringbone
Valve Pot API-5﹟ API-6﹟ API-6﹟ API-7﹟ API-7﹟
Gear Ratio 4.286:1 4.207:1 4.207:1 4.206:1 4.206:1
Suction Inlet 203/8″ 305/12″ 305/12″ 305/12″ 305/12″
Discharge Inlet 4″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi 5″Flange
5000 psi
Lubrication Forced&
Splash Forced&
Splash Forced&
Splash Forced&
Splash Forced&
Splash
Max. Pressure 27.2Mpa
3945 psi 34.5Mpa
5000 psi 34.5Mpa
5000 psi 34.5Mpa
5000 psi 35Mpa
5080 psi
Overall Size(in) 144*106*86 163*89*70 163*89*70 174*121*78 181*129*106
Weight(kg) 9770 18790 18790 24572 24791
Note: 1. Ratings are based on 100% volumetric efficiency and 90% mechanical efficiency.
2. Recommended strokes and input powers are under continuous operations.
Other supplier products
|
|
Crown Block |
The Single-shaft Electric Drawwork:
The drawwork is single-shaft with grooved drum structure, has less spare parts, small cubage, light weight co... |
|
|
Junk Mills |
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardband... |
|
|
Junk Mills |
SHOCK ABSORBER
Type SJ
Shock Absorber Type SJ should be connected with the drilling string close to the bit. It can reduce or absorb both longi... |
|
|
Mud Pump |
Overshot Type LT-T is an effective tool used for catching the fish with smooth external surface. Its circulation can be carried out under high pump... |
|
|
Junk Mills |
Elevators
DDZ Elevators
Center Latch Elevators are suitable for handling 18°taper shoulder drill pipe, drilling tools and etc. The elevators are ... |
供应产品
Same products
