Melt Flow Index Equipment
Discription:Melt Flow Index Equipment is designed and manufactured in accordance with GB/ t3682-2000,Website:, ASTM d1238-98 standards, and refer to JB/T5456, ISO1133 and other similar standards for the measurement of thermoplastic melt mass flow rate (MFR) instrument.The final results of the measurement method are displayed on the touch screen of the instrument and output by the micro-printer.The instrument measuring data is accurate, simple operation, intuitive and clear, stable and reliable performance, it is not only applicable to the high melting temperature of polycarbonate (PC), fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polypropylene (PP), polyformaldehyde (POM), polystyrene (PS) with lower melting temperature, such as ABS resin, polycarbonate plastic.Widely used in plastic production, plastic products, petrochemical and other industries and related colleges and universities, scientific research units, commodity inspection departments. Standard: GB/T3682-2000,ISO1133-97, ASTM1238 Product Character:1.English LCD Touched Screen.2.Hand automatic cutting material.3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc.4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.5.Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.7.Automatic calculation results, and print. Test Methods: MFR MethodsDisplay Mode: English color touch screen display Specification1. Extruded material:Discharging mouth diameter: Φ 2.095±0.005 mmLength of discharge port: 8.000 ±0.025mmCharging tube diameter: Φ 9.550 ± 0.025 mmLength of charging barrel: 152± 0.1 mmPiston rod head diameter: 9.475± 0.015 mmPiston rod head length: 6.350 ±0.100 mm2. Standard test load (kg, 8 grades in total)Grade 1:0.325kg= (piston rod + weight pallet + heat shield +1 weight body) = 3.187nGrade 2:1.200 kg=(0.325+ #2 weight 0.875)= 11.77nLevel 3:2.160 kg=(0.325+ #3 1.835 weight)= 21.18nGrade 4:3.800 kg=(0.325+ #4 3.475 weight)= 37.26nGrade 5:5.000 kg=(0.325+ #5 4.675 weight)=49.03 NGrade 6:10.000 kg=(0.325+ #5 4.675 weight + #6 5.000 weight)=98.07 NGrade 7:12.500 kg=(0.325+ #5 4.675 weight + #6 5.000+ #7 2.500 weight)= 122.58nGrade 8:21.600 kg=(0.325+ #2 0.875 weight + #.3 1.835+ #4 3.475+ #5 4.675+ #6 5.000+ #7 2.500+ #8 2.915 weight)= 211.82nThe relative error of test load：≤0.5%.3. Display mode: touch screen4. Print test report: support5. Test method: quality method6. Temperature range: room temperature - 400 ℃.7. The constant temperature precision: ±0.2 ℃8. Resolution: 0.1 ℃9. Scraping mode: automatic/manual10. Power supply voltage: 220V 10% 50Hz
Other supplier products
|
|
Melt Index Tester |
1. Product Introduction：Melt index tester for high precision automatic melt flow rate instrument,Website:, used for testing all kinds of plastic, r... |
|
|
Melt Flow Index Equipment |
Discription:Melt Flow Index Equipment is designed and manufactured in accordance with GB/ t3682-2000,Website:, ASTM d1238-98 standards, and refer t... |
|
|
Melt Index Tester |
1. Product Introduction：Melt index tester for high precision automatic melt flow rate instrument,Website:, used for testing all kinds of plastic, r... |
|
|
Melt Flow Index Testing Equipment |
Discription:Melt flow index testing equipment is for high-precision melt flow rate instrument tester,Website:, used for testing all kinds of plasti... |
|
|
Melt Flow Index Machine |
Discription:Melt flow Index Machine can be used for ABS,Website:, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, ... |
供应产品
Same products
