Snatch Block
Snatch Block is a lifting tool for transferring over short distances or to double/triple the capacity when used in conjunction with hoist/winches. It is also widely used for recovery where a three-point motion is needed. TITANSUHEsnatch block manufacturerssnatch blocks are all constructed sturdy and durable with a smooth pulley wheel and wide sheave that can reduce the wear of wire ropes. It's your excellent choice in most rigging and lifting applications.
Maintenance of snatch rigging blocks
The pulley should be checked termly according to the condition of operation and working environment. The period should be one time for every 3months at least. If available, static loading experiment on the basis of 1.6 times of rated capacity is suggested.
When examining and repairing the pulley, the parts should be cleaned with gasoline and coated with lubricant and anti-rusty oil, then re-assembled.
In the handling process, the pulley is not allowed to throw and smash to avoid component deformation.
If you do not use the pulley for a long time, it should be cleaned and then coated with anti-rusty oil, stored in a ventilated, dry place to avoid corrosion.
Regulations of Safe Use the rope sheave block
Overload is prohibited, no stands under the lifting objects .
Confirming the pulley snatchis intact prior to use, the lubrication of the transmission part is well and idling situation is normal.
The hook should be scrapped if one of the following cases appears
a) Crack
b) If worn, the actual height of the dangerous section is less than 95% of the basic dimensions
c) Deformation of hook mouth is more than 10% of former size
d) Torsional deformation is more than 10%
e) Dangerous section or hook neck generates plastic deformation
The wheels should be scrapped when one of the following cases appears
a) crack
b) radial wear of wheel groove reaches 25% of the nominal diameter of the wire rope
c) the wear of the groove reaches 10% of basic dimensions.
d) Unequal wear of the groove reaches 3mm
e) other defects
The total load of the pulley should not exceed its rated capacity. When only part of wheels is used for lifting for the multiple sheave blocks, the loading capacity should be lowered and the reduced data is determined by numbers of ratio wheel. The gravity centre of the object should also through the centre line of the pulleys.
When the pulley is used under the rated capacity, movement speed of the wire rope shall not exceed 30 m/min. If the impact load is comparatively bigger during the lifting, upper grade pulleys should be adopted, otherwise accident may occur.
When use the pulleys lift the high temperature or corrosive medium, if there is thermal radiation or contact with corrosive medium, upper grade pulleys should be adopted
If the wear of the middle diameter of the centre shaft reaches 2% of basic dimensions, the pulley should be scrapped.
The pulleys should be scrapped when the wear of sliding bearing thickness reaches 20% of basic dimensions defects on the ball bearing.
As one of the most professional lifting equipment manufacturers, we provide snatch block sheave, wire rope snatch block, wire rope sheave block, steel wire rope, wire rope clips, etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Chain Hooks | Chain Hooks As one of chain hooks manufacturers, TITANSUHE has a huge range of chain hooks for Rigging and Tie Down. All our chain hooks are made ... |
 |
Electric Chain Hoist | Driven by electric power or battery, the electric chain hoist chinahave much advantages on lifting speed and labour saving against manual chain hoi... |
 |
Wire Rope Sling | Steel clamp wire slings are used in steel warehouses, metalworking shops, and construction sites where extreme lifting height is required. Structur... |
 |
Light Duty Rigging Hardware | Rigging hardwarecomes in a huge range from snap hook, S hook, quick link, hitch pin,round ring, small pulley and so on. These hardware are used for... |
 |
Dumbwaiter Lift | Dumbwaiter Lift is a reliable, time-saving and practical way to transport items between different floors of a house or building. In terms of its si... |
Same products
 |
多功能金属柄折叠美工刀 | 卖方: 深圳市维客修科技有限公司 | 描述 这款铝合金手柄多功能折叠美工刀/裁纸刀适用于直播开箱/DIY工艺雕刻等。折叠美工刀采用可折叠不锈钢刀身、轻巧铝合金手柄和防滑握柄，确保刀片稳定安全。刀片更换快捷方便，兼容大多数标准尺寸刀片... |
 |
iPhone 17系列主板测试专用夹具 | 卖方: 深圳市维客修科技有限公司 | 描述 用于检测 iPhone 17/Air/17 Pro/17 Pro Max 主板功能的 XZZ iSocket 17 系列和 YCS 主板分层测试夹具。XZZ/YCS iS... |
 |
WHJJ-YL006 Party String Spray /Crazy Ribbon Spray | 卖方: Zhejiang Weihua Jujiu Technology Co., Ltd. | Party string spray /crazy ribbon spray, a creative and surprising party decoration artifact, has ... |
 |
CW-1632 机械式管夹 | 卖方: 台州瑞霸工具有限公司 | 产品编号：CW-1632 最大压力：40KN 行程：17mm 长度：580mm 重量：6.5KG 可选压接模具：TH型：16、20、26、32mm U型：16、20、25、32mm ... |
 |
Uratech : High-Quality Red nylon inserts for all types of CNC Holders. | 卖方: Uratech USA Inc | Uratech : High-Quality Red nylon inserts for all types of CNC Holders Durable CNC Red Nylon Inse... |
