Gardener Denver PZ-9 Triplex Mud Pump Valve Assembly
HNA offers 5 different styles of valves & seats to fit your drilling needs, suiting to almost all popular mud pumps in the world.
The Stem Guided valve and seat and the Wing Guided valve and full open seat offers many advantages for today's higher pressures and faster drilling operations.
Stem-guided valve &Tri-arm seat features greater fluid flow than four-arm seats, as well as it features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non-breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positive sealing. The strong, thick, valve knock off nut holds the insert tightly reducing flex and breathing which lessens the chance of foreign matter getting between valve and insert.
Stem-guided valve & Cross-arm seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non-breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positive sealing. The strong, thick, valve knock off nut holds the insert tightly reducing flex and breathing which lessens the chance of foreign matter getting between valve and insert.
Tri-wing guided valve & Full open seat
Three-wing guided valves and full open seats features greater fluid flow than four-wing valves, the unibody forged valve features greater strength than traditional welded-wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
HNA makes two styles of Four-wing guided valves and full open seats which feature greater fluid flow through the full open seat. The full open seat provides easier valve maintenance and seat pulling, in valve-over- valve fluid ends.
Innovative unibody Four-wing guided valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation. This combination will handle lost circulation material better than most conventional style valves and seats while the seating angle greatly improves flow characteristics and the heavy-duty load bearing capacity greatly improves service life.
The unibody forged Four-wing guided valve & Full open seat features greater strength than traditional welded-wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
TONY
sales3(at)pumpparts.cn
在线联系供应商
Other supplier products
 |
API Green Due Piston and Wirth Piston | HNA offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are: • Pistons with replacement rubb... |
 |
泥浆泵 | We are a large drilling tools, Drilling rig spares, Water well drilling and mining pump part, Drilling mud pumps and Fluid End Expendables and mud ... |
 |
Russian NBT-300 Mud Pump Bimetal Liner | HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner... |
 |
Well service EWS-446 triplex mud pump | 一、 HW446 Mud Pump TECHNICAL SPECIFICATION Rated input power 328KW (440HP) Rated Stroke 320 Stroke/Minute(320SPM) Stroke 152.4mm （6"） Gear Ratio ... |
 |
National 14-P-220 Triplex Mud Pump Bimetal Liner | HNA offers four different type of liners for all popular mud pumps to suit any drilling condition, including Premium Chromium Liners, Ceramic Liner... |
Same products
 |
CM-A201 wire striping and crimping machine | 卖方: 816004 | product link: Features:1.Peeling and crimping terminals are completed at one time, and waste s... |
 |
Cable winding and bundling machine | 卖方: 816004 | product link: |
 |
调压阀组 | 卖方: 河南上阀阀门股份有限公司 | 由ZAJW-1型自动调节蝶阀及常通管组成。在使用中一般用一台ZAJW-1型自动调节蝶DDZ型电动单元组合仪表进行自动控制，其余二台（或三台）ZAJW-1型自动调节蝶阀由阀门配置的DKJ电动执行器... |
 |
旁通快开阀 | 卖方: 河南上阀阀门股份有限公司 | 旁通快开阀采用三偏心金属密闭蝶阀结构形式，驱动方式采用液压伺服机构（可提供独立液压控制单元）, 与快速切断阀配合使用，在TRT系统出现异常时保证高炉系统正常生产。 公称通径：DN500-1200... |
 |
螺纹元件和芯轴 | 卖方: 南京嘉和熙成环保科技有限公司 | Kalshine提供高质量，耐腐蚀的螺杆元件，用于挤压食品，药品和零食，以及低烟无卤母料以及需要耐腐蚀的氟塑料双螺杆挤出机。 |
