Forged Alloy Steel Blocks
Forged Alloy Steel Blocks,
Dimension Rangein (mm):
Round Steel Bars: Φ 12~280, Φ 290~1000
Square/Flat Steel Bars: 10~200 × 50~600 × 2000~6000
Steel Blocks: 200~800× 600~1200 × 500~6000
Steel Forgings: Roller, Rings, Shafts, Cranks and Hollow Bars can be produced and machined according to customers' size and drawing.
Note:
1. Delivery Condition: Hot Rolled, Forged, Cold Drawn or Cold Rolled.
2. Surface: Black/peeled/grinding/rough machined (turned&milled)/ finish machining can be provided
3. Heat Treatment: Annealing, Normalizing, Q/T(Quenching and Tempering), Pre-Hardening etc. Can be done according to steel grade and customer's requirements.
| Products Category and Main Steel Grade: |
| Alloy Steel |
| GB |
JIS |
ASTM |
DIN |
| 20Mn2-50Mn2 |
SMn420-SMn443 |
1320-1345 |
20Mn5-50Mn7 |
| 15Cr |
SCr415 |
5115 |
17Cr3 |
| 20Cr |
SCr420 |
5120 |
17Cr3 |
| 30Cr |
SCr430 |
5130 |
28Cr4 |
| 35Cr |
SCr435 |
5135 |
34Cr4 |
| 40Cr |
SCr440 |
5140 |
41Cr4 |
| 45Cr |
SCr445 |
5145 |
- |
| 50Cr |
- |
5150 |
- |
| 15CrMo |
SCM415 |
- |
15CrMo5 |
| 20CrMo |
SCM420 |
4118 |
- |
| 30CrMo |
SCM430 |
4130 |
25CrMo4 |
| 35CrMo |
SCM435 |
4135 |
34CrMo4 |
| 42CrMo |
SCM440 |
4140 |
42CrMo4 |
| 15CrMn |
- |
5115 |
16MnCr5 |
| 20CrMn |
SMnC420 |
5120 |
20MnCr5 |
| 20CrMnTi |
- |
- |
- |
| 38CrMoAl |
SACM645 |
- |
- |
| 60Si2MnA |
SUP6/SUP7 |
9260 |
61SiCr7/1.7108 |
| 55CrMnA/60CrMnA |
SUP9/SUP9A |
5155/5160 |
55Cr3/1.7176 |
| 50CrVA |
SUP10 |
6150 |
51CrV4/1.8159 |
| 60Si2CrA |
- |
9254 |
54SiCr6/1.7102 |
| 20CrMnMo(H) |
SCM421(H) |
4119 |
- |
| 40CrMnMo |
SCM440 |
4142 |
42CrMo4 |
| 20CrNi-50CrNi |
SNC236 |
4720 |
- |
| 12CrNi2 |
SNC415 |
4320 |
10NiCr5-4 |
| 20CrNiMo |
SNCM220 |
8620 |
21NiCrMo2 |
| 34CrNiMo |
- |
- |
34CrNiMo6 |
| 40CrNiMo |
SNCM439 |
4340 |
36CrNiMo4 |
Other supplier products
|
|
Hot Rolled Carbon Steel |
Hot Rolled Carbon SteelSpecification:Diameter (mm) Length (mm)Round bar 12~300 4000~6000 Hot rolled280~1000 3000~5800 ForgedThickness(mm) Width(mm)... |
|
|
Forged Steel Bar H13 |
Forged Steel Bar H13,H13 hot work tool steelSteel Grade: Tool Die Steel/Mould Steel 4Cr5MoSiV1/ H13 / SKD61 / 1.2344 / X40CrMoV5-1Specification:Dia... |
|
|
Alloy Steel Bars 4135/ SCM435 /34CrMo4/ 35CrMo |
Alloy Steel Bars 4135/ SCM435 /34CrMo4/ 35CrMoSpecification:Round bar: Diameter(mm) Length (mm)12~300mm 4000~6000 Hot rolled280~1000mm 3000~5800 Fo... |
|
|
Mould Steel D3/X12 Round Bars |
Steel Grade:
Cr12/ D3 / SKD1 / 1.2080 / X210Cr12Specification:Round barDiameter (mm)Length (mm)12~300mm4000~6000 Hot rolled280~1000mm3000~5800 for... |
|
|
P20 Tool Steel |
P20 Tool SteelForm of SupplyWe as the of suppliers of P20 tool steel round bar, flat bar and plate. Diameters in P20 can be sawn to your required l... |
供应产品
Same products
