.

JMZ-1-3.0B Rubber & Metal Anti Vibration Mount

With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the vibration source in engineering practice is increasing constantly, the harm is also obvious because of vibration and noise. Vibration does the great harm to operators, precision instruments, machinery equipment and architectural structure, at the same time, vibration and the noise is also bad for people's living condition and physical and mental health. Therefore, harm from vibration and noise is drawing more and more attention from researchers from various countries.Vibration and noise are harmful in most cases, vibration hazards are regarded as one of the seven environmental hazards. The hazards of vibration and noise can be divided into the following aspects:

1. Harm to human bodies

When vibration is over certain strength, it will do harm to human bodies. People will have insomnia, lumbago, backache, fatigue, impotence, headache, dizzy, drowsy, gastro-intestinal, low appetite and weak attention id they are under the environment of large vibration and noise for a long time, it is also easy to make mistakes and technical error, what's worse, it will make people's senses blunt and cause physical illness.

2. Harm to structures of buildings

brings unsafe factors to buildings when vibration is acting on buildings, that is to say, mechanical energy is acting on buildings, it will create deformation. Vibration makes bigger deformation and setting of the ground. When vibration frequency and building structure frequency is the same or similar, the harm will be more serious, it even makes buildings fall down. Vibration will cause uneven sedimentation and damage plant and equipment if the basic geological condition of equipment is bad.

3. Produce noise and pollute the environment

At present, machinery equipment and power is larger and larger and its variety is more and more diversified, after the vibration from machinery equipment is transferred to basics, floors, walls and other structure, vibration will transfer to other room by elastic waves and create vibration between neighboring air, so the vibration of objects will be spread to everywhere in the form of sound wave, that is what we called noise. Ferroconcrete and metal are the good material for isolating air noise, but it makes no differences for solid state noise, sometimes a pump can break the peace of the whole building.

4. Influence the precision of precise instrument and equipment

Vibration breaks the accuracy, reliabilityandsensitivity. If the instruments and apparatus are near the strong vibration source, vibration will have the different influence on them. Influence on the normal operation of instruments and influence on the accuracy of the scale of apparatus reduces the precision of measurement, what's worse, it will make instruments out of order, especially for electric instruments.Therefore, how to decrease the harm of vibration and noise efficiently is a very important issue for the industrial development all over the world, vibration control is the most direct way to decrease the harm of vibration and noise in engineering practice, so the research of vibration control is necessary for controlling vibration and noise.



在线联系供应商

至: Xi\'an Hoan Microwave Co., ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone
GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone The GRY-5A marine shipbuilding vibration mount is made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. The max static loa...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount Rubber vibration isolator is the most widely used vibration isolator, it is widely used in various fields like the vehicle, shipping, automobile, p...
GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone
GRY-5A Stainless Steel Vibration Mount for Film/Cinema/Camera/Drone The GRY-5A marine shipbuilding camera vibration isolation mountis made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. Th...
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount
JMZ-1-2.0B Rubber & Metal Anti Vibration Mount JMZ-1-2.0B rubber vibration absorberbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good i...
JMZ-1-1.5B Rubber Anti Vibration And Shock Absorbing Mounts
JMZ-1-1.5B Rubber Anti Vibration And Shock Absorbing Mounts Advantages of Base Isolation Technology of Antivibration Mount JMZ-1-1.5A rubber cushion mountsbelong to the JMZ-1 series. It adopts the struct...
供应产品

Same products

PCD Milling Cutter
PCD Milling Cutter 卖方: LINKUT PRECISION TOOLS CO.,LTD PCD diamond milling cutters mainly include: PCD (diamond) welding forming milling cutter, PCD end...
Monocrystal Diamond Chamfering Tool
Monocrystal Diamond Chamfering Tool 卖方: LINKUT PRECISION TOOLS CO.,LTD Mono crystal diamond (MCD or SCD) tools (such as chamfering and milling cutter) are currently the...
PDC Cutter Insert
PDC Cutter Insert 卖方: LINKUT PRECISION TOOLS CO.,LTD LINKUT delivers high-performance polycrystalline diamond compact (PDC) products for oil&gas drill...
VCGW PCD Inserts
VCGW PCD Inserts 卖方: LINKUT PRECISION TOOLS CO.,LTD Diamond cutting tools are divided into natural diamonds and synthetic diamonds. Synthetic diamond...
SNGN Indexable Cubic Boron Nitride Tools
SNGN Indexable Cubic Boron Nitride Tools 卖方: LINKUT PRECISION TOOLS CO.,LTD SNGN Solid CBN Inserts such as SNGN090308 with the high cost performance for the automotive indus...